424269
55
Zoom out
Zoom in
Previous page
1/86
Next page
7. Programmable Features
53
Code #44: Setting the memory reception alert
RECEIVE ALERT
=ON [±]
To alert you with a beeping sound when a
received fax document is stored into memory
due to some existing problem.
The slow beeps will continue until you clear the
printing problem and make sure the unit is
supplied with enough paper to print the stored
document.
ON (default): You will be alerted to a reception
problem by a beeping sound.
OFF: Deactivates this feature.
Code #46: Setting friendly reception
FRIENDLY RCV
=ON [±]
To receive a fax automatically when you answer
a call using the base unit and hear a fax calling
tone (slow beep).
ON (default): You do not have to press
{FAX/START} for fax reception.
OFF: You have to press {FAX/START} for fax
reception.
Code #47: Setting the fax voice guidance
FAX GUIDANCE
=ON [±]
If you wish to hear voice guidance, activate this
feature.
ON (default): You will hear voice guidance.
OFF: Deactivates this feature.
ERROR: To hear voice guidance only when fax
transmission/reception fails.
Code #51: Setting the mailbox 1 password
BOX1 PASSWORD
ID=
To prevent other users from retrieving your
messages, program a password for mailbox 1.
1. Press {MENU}.
2. Press {#}, then {5}{1}.
3. Enter a 3-digit number except a number
using digits 0 or 7.
L The default ID is 555.
4. Press {SET}.
5. Press {MENU}.
Code #52: Setting the mailbox 2 password
BOX2 PASSWORD
ID=
To prevent other users from retrieving your
messages, program a password for mailbox 2.
1. Press {MENU}.
2. Press {#}, then {5}{2}.
3. Enter a 3-digit number except a number
using digits 0 or 7.
L The default ID is 555.
4. Press {SET}.
5. Press {MENU}.
Code #54: Changing the recording time for
your TAD/FAX greeting message
GREETING TIME
=16s [±]
16s (default): Maximum recording time is 16
seconds.
60s: Maximum recording time is 60 seconds.
See page 43 for details.
Code #55: Greeting message for mailbox 1
BOX1 GREETING
CHECK [±]
See page 47 for details.
Code #56: Greeting message for mailbox 2
BOX2 GREETING
CHECK [±]
See page 47 for details.
Code #60: Setting the message transfer
MESSAGE TRANSFER
=OFF [±]
To transfer recorded incoming messages to
another telephone (page 48), activate this
feature and program the transfer telephone
number.
1. Press {MENU}.
2. Press {#}, then {6}{0}.
3. Press {A} or {B} repeatedly to select ON.
4. Press {SET}.
5. Enter the transfer telephone number.
6. Press {SET}.
7. Press {MENU}.
Code #61: Checking, recording or erasing the
transfer greeting message
TRNS-GREETING
CHECK [±]
See page 48 for details.
FC195E.book Page 53 Wednesday, March 5, 2003 7:15 PM
55


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic kx fc 195 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic kx fc 195 in the language / languages: English as an attachment in your email.

The manual is 7,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info