628491
66
Zoom out
Zoom in
Previous page
1/73
Next page
Symptom Possible Cause Remedy
Double feeding occurs
frequently
.
The paper feed roller, separation
roller
, or double feed prevention
roller is dirty.
Clean the paper feed roller,
separation roller, or double feed
prevention roller. (page 48)
The double feed detectors are dirty.
Clean the double feed detectors.
(page 47
)
The paper feed roller, separation
roller
, or double feed prevention
roller has become worn down.
Replace the paper feed roller
module, and double feed
prevention roller. (page 51)
Right and left sides of the document
to be scanned are not the same in
height, because of curling or folding.
Flatten the document (page 23)
and load it again after reducing
the number of sheets.
The document is printed on an
unsupported type of paper or thick
paper
.
Make a copy of the document on
paper of a compatible type and
thickness (page 23), and then
scan the copy.
The length of the paper is too short.
Make a copy of the document on
paper of a compatible size (
page
23), and then scan the copy.
The document is not aligned
correctly
.
Realign the document. (page 28)
Too many sheets are set on the
feed tray
.
Remove sheets until the sheets
on the feed tray are under the
limit mark on the document guide.
Documents are not being fed
separately
.
Manual feeding is selected.
Select automatic feeding. (page
31)
Paper jams occur frequently.
The document is wrinkled. Smooth out the document.
The rollers are dirty. Clean the rollers. (page 48)
The document is not aligned
correctly
.
Realign the document. (page 28)
Too many sheets are set on the
feed tray
.
Remove sheets until the sheets
on the feed tray are under the
limit mark on the document guide.
Scanned image is skewed.
The document guides are not
adjusted to the size of the document
to be scanned, or the document to
be scanned is set slanted on the
feed tray
.
Adjust the document guides
properly to the size of the
document to be scanned. (page
28)
Right and left sides of the document
to be scanned are not the same in
height, because of curling or folding.
Flatten the document (page 23)
and load it again after reducing
the number of sheets.
The image for a scanned
document is blank.
The document to be scanned was
loaded upside down.
Load the documents with the
surface to be scanned facing up.
Vertical streaks appear on
the scanned document.
The scanning glasses are dirty.
Clean the conveyor and scanning
glasses. (page
46)
8.1 Troubleshooting
66
66


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic KV-S2087 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic KV-S2087 in the language / languages: English as an attachment in your email.

The manual is 1,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic KV-S2087

Panasonic KV-S2087 User Manual - German - 73 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info