568593
14
Zoom out
Zoom in
Previous page
1/56
Next page
-
14
-
Radio signal range limitation function
on/off setting (EYFLA4AR, EYFLA5AR,
EYFLA5QR, EYFLA6PR)
1.
Set the tool to configuration mode.
(See page 11.)
2. Press the format button.
The control panel will begin flashing.
Display: The letter “F” ashes on and off.
Battery indication lamp: The upper and
lower bars of the battery ash on and off.
Display
Battery indication lamp
3. Press the format button again.
Radio signal range limitation function
on/off setting value will be displayed.
4. Press the and buttons to set radio
signal range limitation function on/off.
Display
Radio signal
range limitation
function mode
Status
C0 OFF
Tool is operational in the
absence of communica-
tions with the Assembly
Qualier.
C1 ON
Tool is not operational
in the absence of com-
munications with the As-
sembly Qualier.
Factory settings
Radio signal range limitation function
setting: C0 (OFF)
NOTE:
For more information about how to register
the tool and assembly qualifier, see the
assembly qualifier instruction manual.
Initializing All Settings
Factory settings
Torque clutch setting: “F” (torque con-
trol function off)
Interval setting: 0 (off)
This section explains how to revert all tool
settings to their default values at the time of
shipment from the factory.
The error display will be turned off.
1. Set the tool to configuration mode.
(See page 11.)
2. Press the format button.
The control panel will begin flashing.
Display: The letter “F” ashes on and off.
Battery indication lamp: The upper and
lower bars of the battery ash on and off.
Display
Battery indication lamp
3. Press the OK button to accept the select-
ed setting.
The control panel will stop flashing and
light up.
Checking Tool Settings
This section describes how to have the
tool display current settings for approx-
imately 3 seconds when the tool is
stopped.
You cannot check tool settings when the
control panel is turned off. First, engage
the switch briefly to reactivate the display.
Checking the sung point detection setting
1.
Press the torque set button.
Control panel display
Display: The torque set lights up.
Battery indication lamp: The upper and mid-
dle bars of the battery ash on and off.
Checking the interval
1. Press the interval set button.
Control panel display
Display: The interval set lights up.
Battery indication lamp: The middle bar
of the battery ashes on and off.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic EYFLA6 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic EYFLA6 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 4,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info