Manual Panasonic EYFLA6 (page 12 of 56) (English, French, Spanish)

568593

Zoom out

Zoom in

1/56

• You can select from 30 torque clutch

settings (1 to 30).

•

Use figures from the Tightening Torque

Chart to guide your selection of torque

clutch setting. (See the following tighten-

ing torque chart)

. Press the OK button to accept the select-

ed torque clutch setting.

•

The control panel will stop flashing and

light up.

CAUTION:

•

You must press the OK button in order

for the selected setting to take effect.

•

Be sure to verify the new value after

changing the setting. (See page 14.)

Setting the snug point detection level

(2)

(3)

(1)

1. Press the torque setting mode button.

• The snug point detection level setting

value will be displayed.

Display

Battery indication lamp

2. Press the and buttons to set the best

snug point detection level for the work

you’re performing.

Display Snug point detection level

Low

(Use for work characterized by

low loads before the snug point

is reached.)

High

(Use for work characterized by

high loads before the snug point

is reached.)

Press the OK button to accept the number

of torque stages and the snug point detec-

tion level.

•

The tool’s panel will flash and then light

up continuously.

CAUTION:

• Set the snug point detection level from

“L1.” Setting the snug point detection level

rom “L2” may result in cracking or defor-

mation of the target material.

• I

f the tool stops before the snug point at

snug point detection level “L1,” set the

nug point detection level to “L2.”

• Changing the snug point detection level

from “L1” to “L2” may increase the torque.

Set the number of torque stages again

after making this change.

• The setting will not be changed until

you press the OK button.

• After changing the setting, be sure to check

the new setting value. (See page 14.)

IMPORTANT INFORMATION:

• You can set the snug point detection

level and retightening prevention time at

the same time by changing the retight-

ening prevention time (see page 13)

before pressing the OK button and then

pressing the OK button.

•

Pressing the torque setting mode but-

ton toggles the display between the

snug point detection level setting value

and the number of torque stages set-

ting value.

•

The tool ships with the snug point

detection level set to “L1.”

•

When the number of torque stages has

been set as shown below, the snug

point detection level cannot be switched

from “L1” to “L

2.”

Model

Number of torque stages

setting

EZFLA4 1 to 8

EZFLA5 1 to 3

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic EYFLA6 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 4,58 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Panasonic EYFLA6 Manual

Product: