Manual Panasonic EYFLA1A (page 10 of 168) (English, German, Dutch, Danish, French, Italian, Swedish, Spanish, Norwegian, Finnish)

502434

Zoom out

Zoom in

1/168

NOTE:

• All 3 bars on the battery indication lamp

will flash when the automatic power-off

function is activated.

•

When the battery indication lamp begins

flashing, the battery pack should be

charged (or replaced with a fresh unit)

immediately.

•

Be sure to fully charge the battery pack

in question after activation of the auto-

matic power-off function. Failure to do

so may prevent the automatic power-off

function from being properly deactivated.

(3) The torque control function

• The torque control function calculates the

load from the motor’s rotational angle during

the hammer impact and determines that the

bolt has been properly seated when a pre-

set load value is exceeded. Driving is then

automatically stopped after a preset number

of impacts have been delivered to the bolt.

CAUTION:

•

Always check the tool’s tightening torque

before use. Improper tool operation may

result in excessive or inadequate tight-

ening.

CAUTION:

•

Always operate the tool with the switch

fully engaged. The torque control func-

tion will not operate when the switch is

not sufficiently engaged, preventing the

tool from stopping automatically.

•

In work where a heavy load comes to

bear during tightening, the load may be

interpreted as the seating of the bolt,

preventing the bolt from being com-

pletely tightened.

•

Repeated tightening of the same bolt

may break the bolt or deform the mate-

rial into which the bolt is being driven as

a result of excessive tightening.

•

The tightening torque value and preci-

sion vary with factors such as the mate-

rial into which the bolt is being driven

and the condition of the socket being

used. Adjust the torque as necessary

for the work being performed. Bolt tight-

ening torque varies due to the factors

described below.

1) Bolt

•

Bolt diameter: Tightening torque gener-

ally increases with bolt diameter.

•

Torque coefficient (indicated by the bolt

manufacturer), grade, length, etc.

) Other

• Bit and socket condition: Material,

amount of play, etc.

•

Use of a universal joint or socket

adapter

•

User: Manner in which the tool is

applied to the bolt, strength with which

the tool is held, manner in which the

tool’s switch is engaged

•

Condition of object being tightened: Ma-

terial, seating surface finish

Setting the tool to configuration mode

Turn off the control panel.

• If the control panel is on, remove and

then reinsert the battery pack.

Engage the switch while pushing the

button and then release both the

but-

ton and the switch.

•

After all the LED lamps have turned off,

the control panel will flash and change

to configuration mode.

NOTE:

• Tools ship from the factory set to “F”

mode (torque control function off).

•

The control panel will turn off if the tool

is not operated for a period of 5 min-

utes.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic EYFLA1A in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 17,89 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Panasonic EYFLA1A Manual

Product: