568597
11
Zoom out
Zoom in
Previous page
1/200
Next page
-
11
-
EN
NOTE for
EY7430
• The clutch delivers different levels
of torque based on the location,
material, and type of the screw. Be
sure to check these before starting.
• Due to the way the product is
constructed, you may sometimes not
be able to set it to drill mode after
operating the clutch. This does not
mean the product is broken. When
this happens, set the clutch to (1) and
rotate a few times.
• When loosening the screws, adjust
the torque position to “
”.
Model No: EY7430 & EY7530
Speed Selection for
EY7430
Choose 1 (LOW) or 2 (HIGH) speed to
suit the use.
Fig.6
The more the variable speed control
trigger is pulled, the higher the speed
becomes.
CAUTION:
• Check the speed selector switch
before use.
• Use at low speed when high torque
is needed during operation. (Using
at high speed when high torque
is required may cause a motor
breakdown.)
• Do not operate the speed selector
switch [1 (LOW)- 2 (HIGH)] while
pulling on the speed control
trigger. This can cause the
rechargeable battery to wear
quickly or damage the internal
mechanism of the motor.
* See specifications for “ MAXIMUM
RECOMMENDED CAPACITIES ”.
• Continued operation with the
speed control trigger held down
can cause electric parts to break
and the tool to stop working.
NOTE:
• Always use the low speed [1 (LOW)]
when drilling large holes with a wood
drill bit or a hole saw.
Switch and Forward/Reverse Lever
Operation
Fig.4 for
EY7430
Fig.7 for
EY7530
CAUTION:
To prevent damage, do not operate
Forward/Reverse lever until the bit
comes to a complete stop.
Forward Rotation Switch Operation
1. Push the lever for forward rotation.
2. Depress the trigger switch slightly to
start the tool slowly.
3. The speed increases with the amount
of depression of the trigger for efficient
tightening of screws and drilling .
The brake operates and the chuck
stops immediately when the trigger is
released.
4. After use, set the lever to its center
position (switch lock).
Reverse Rotation Switch Operation
1. Push the lever for reverse rotation.
Check the direction of rotation before
use.
2. Depress the trigger switch slightly to
start the tool slowly.
3. After use, set the lever to its center
position (switch lock).
NOTE:
The drill will stop if the Forward/Reverse
lever is pushed while the trigger is
held down.This will happen even if
the Forward/Reverse lever is pushed
accidentally.
You will not be able to hold the trigger
down again until you release it and
return the Forward/Reverse lever to its
original position.
Clutch Torque Setting for
EY7430
Adjust the torque to one of the 17 clutch
settings or “
” position.
Fig.5
CAUTION:
Test the setting before actual
operation.
EY7530_7430_3732_0L32_02(Eng).indd 11 2014/08/18 15:40:52
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic EY7430 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic EY7430 in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 6,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info