502410

Panasonic EY7411 Manual

8
Zoom out
Zoom in
Previous page
1/140
Next page
-
8
-
Starting the control panel
1. Release the hold switch.
2. To illuminate the control panel
1 Release the lock button
2 Press (Control panel is lit.)
● The count display lamp and “UP” or
“DOWN” are illuminated.
Setting the count functions (Screw
count setting/Count system setting)
1.
Press while the control panel is
illuminated.
Each time is pressed, the screw
count setting and count system set-
ting switch and flash.
● Screw count setting
→Countdisplaylampflashes.
● Count system setting
→“UP”or“DOWN”flashes.
2. Screw count setting
Set the number of screws with
or
.
● The range can be set within 0 – 99.
● 0 is not counted.
Count system setting
Press
. “UP” or “DOWN” will begin
to flash. Next select (“UP”) or
(“DOWN”).
● Press and hold the ( ) or ( )
buttons while setting the torque to
vary the value continuously.
< Count System “UP” >
● Displays the count for the number
of screws driven.
(
Set number
)
The settings are activated by pushing
.
● When the set number of screws is
reached, the buzzer sounds and
the count value resets to zero.
< Count System “DOWN” >
● Displays the count for the remain-
ing number of screws to be driven.
(
Set number
)
● When the set number of screws to
be driven is reached, the buzzer
sounds and the count value resets
to original set number.
3. The settings are activated by pushing
.
● The previous setting will be cleared.
4. To prevent changes in the set values
due to operational errors.
ON
● Turn the HOLD switch
to ON.
Convenient function settings (buzzer
sound setting/double tightening
counting prevention time setting)
1.
Press for 2 or more seconds while
the control panel is illuminated.
● Count display lamp “F1” is illumi-
nated.
Each time is pressed, the
buzzer sound setting and double
tightening counting prevention time
setting can be switched.
● “Buzzer sound setting”
→“F1”isilluminated.
● “Double tightening counting pre-
vention time setting”
→“F2”isilluminated.
2. Buzzer sound setting
The buzzer sound can be selected
with when “F1” is illuminated.
Operation
Display Sound Frequency
b3 High pitched sound
(Approx. 4 kHz)
b2
Medium pitched
sound (Approx. 3
kHz)
b1 Low pitched sound
(Approx. 2 kHz)
b0 No sound (OFF)
● If is pressed, the buzzer sound
saved from the previous setting is
displayed.
Double tightening counting preven-
tion time setting
Press
to illuminate “F2” and select
the time with .
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic EY7411 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic EY7411 in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 9,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info