502410
7
Zoom out
Zoom in
Previous page
1/140
Next page
-
7
-
Bit
Hexagonal bit chuck
9.5 mm (3/8") - 13 mm (33/64") 6.35 mm (1/4")
Clutch Handle
(Clutch Torque Setting)
Adjust the torque to one of the 21 pos-
sible settings to the job. There is an
interval of about 0.13 N·m (1.3 k f-cm
or 1.1 in-lbs) between steps.
CAUTION:
Test the setting before actual opera-
tion.
Set the scale at this mark.
Reference for Adjusting Torque
Setting
Torque Use
1
Approx: 0.29 N
·
m
(3.0 k
g
f-cm or 2.6 in-lbs)
For driving
screws
5
Approx: 0.82 N
·
m
(8.4 kgf-cm or 7.3 in-lbs)
9
Approx: 1.35 N
·
m
(13.8 kgf-cm or 12.0 in-lbs)
13
Approx: 1.88 N
·
m
(19.2 kgf-cm or 16.6 in-lbs)
17
Approx: 2.41 N
·
m
(24.6 kgf-cm or 21.3 in-lbs)
21
Approx: 2.94 N
·
m
(30.0 kgf-cm or 26.0 in-lbs)
Approx: 4.4 N
·
m
(45.0 kgf-cm or 39.0 in-lbs)
For power-
ful driving
screws and
drilling
When using at high speeds, set the
clutch at 10 or below. (Operation
stops at the maximum torque of 1.5
N·m (15 kgf-cm) when the scale is
higher.)
The auto shut-off function may
become inoperable at high clutch
settings when battery power drops.
Recharge the battery in that case.
NOTE:
The chart is only a reference. The
torque settings may differ by materi-
als, types of screws, etc. Please test
it at your own conditions before use.
Control Panel
Manufacturer settings upon shipment
Count system: Count down system
Count setting value: 99
Buzzer sound pitch: b1 (Low sound)
Double tightening counting preven-
tion count time: 0 (OFF)
Hold switch: Released
Please set the settings according to
conditions of use.
Screw count function
●Countsthe number of autostops.
(Counts the number of screws driven)
●Thecountmethod can be selected
from “UP” or “DOWN”.
●Whenthesetnumberofscrewstobe
driven is reached, a buzzer sounds
and the count value is reset.
●Thebuzzersoundcan beselected
from 3 types of sound.
●Doubletighteningcountingprevention
function
Work (double tightening and screw
driving confirmation, etc.) that began
within the set time is not counted after
the driven screws are counted.
Count display lamp
Count system display
lamp
Lock button
Switch
Hold switch
ON
Release
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic EY7411 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic EY7411 in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 9,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info