Manual Panasonic ey 6535 gqkw (page 9 of 88) (English, German, Dutch, Danish, French, Italian, Swedish, Spanish, Norwegian, Finnish)

386557

Zoom out

Zoom in

1/88

— 9 —

III

. OPERATION

Switch Operation

1. The speed increases with the amount of

depression of the trigger. When beginning

work, depress the trigger slightly to start the

rotation slowly.

2. A feedback electronic controller is used to

give a strong torque even in low speed.

3. The brake operates when the trigger is

released and the motor stops immediately.

Reversing Lever Operation

(Forward ( ), Switch lock, Reverse ( ))

CAUTION: Do not operate reversing lever until

rotation of the spindle comes to a

complete stop. Shifting during rota-

tion of the chuck may damage the

tool.

1. For reverse rotation, set the lever to reverse.

Check the direction of rotation before use.

2. After use, set the lever to its center position

(switch lock). (Fig. 10)

Clutch Torque Setting

Adjust the torque to one of the 18 possible set-

tings or " " position required to do the job.

CAUTION: Test the setting before actual opera-

tion. Set the scale at this mark ( ).

CAUTION: To eliminate excessive temperature

increase of the tool surface, do not

operate the tool continuously, that is

consecutively replacing the battery

packs.

• Do not close up vent holes on the

sides of the body during operation.

Otherwise, the machine function is

adversely affected to cause a fail-

ure

• Impact mechanism creates heat.

Square drive and accessory

become very hot. They may cause

burns.

• Do not strain the tool(motor).

This may cause damage to the

unit.

• Keep body or skin away from

exhaust vent to avoid risk of being

burned by hot air.

• When operating with a Ni-MH bat-

tery pack, make sure the work

place is well-ventilated.

For Appropriate use of Battery

pack

Ni-MH Battery pack EY9230

• Charge the Ni-MH battery fully before storage

in order to ensure a longer service life.

• The ambient temperature range is between

0°C (32°F) and 40°C (104°F).

If the battery pack is used when the battery

temperature is below 0°C (32°F), the tool may

fail to function properly. In that case, charge

the bat-tery until charging is completed for

appropriate functioning of the battery.

• When battery pack is not in use, keep it away

from other metal objects like: paper clips,

coins, keys, nails, screws, or other small metal

objects that can make a connection from one

terminal to another.

Shorting the battery terminals together may

cause sparks, burns or a fire.

• When operating with a Ni-MH battery pack,

make sure the place is well-ventilated.

Battery Pack Life

The rechargeable batteries have a limited life. If the

operation time becomes extremely short after recharg-

ing, replace the battery pack with a new one.

Note: Use under extremely hot or cold condi-

tions will reduce operating capacity per

charge.

Battery Recycling

ATTENTION:

For environmental protection and recycling

of materials, be sure that it is disposed of

at an officially assigned location, if there is

one in your country.

Charging

Note: When you charge the battery pack for the

first time, or after prolonged storage,

charge it for about 24 hours to bring the

battery up to full capacity.

Battery charger (EY0110)

1. Plug the charger into the AC outlet.

Note: Sparks may be produced when the plug is

inserted into the AC power supply, but this

is not a problem in terms of safety.

EY6535(EU).book Page 9 Tuesday, March 1, 2005 9:36 AM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic ey 6535 gqkw in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2,86 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Panasonic ey 6535 gqkw Manual

Product: