672196
13
Zoom out
Zoom in
Previous page
1/210
Next page
13
TR RO H SK CZ PL FIN S N P DK E NL I F D GB
Replacing the system outer foil
1. Press the foil frame release buttons
[D4] and lift the outer foil section [B]
upwards.
2. Press the system outer foil release
buttons [B3] and pull down the system
outer foil [B2].
3. Align the foil frame mark (
) and
the system outer foil mark ( ) and
securely attach together.
The system outer foil cannot be
reversely attached.
Always insert the system outer foil to
the foil frame when attaching to the
shaver.
4. After turning the foil frame mark
( ) to the front, securely attach the
outer foil section [B] to the shaver until it
clicks.
1
2
3
Replacing the inner blades
1. Press the foil frame release buttons
[D4] and lift the outer foil section [B]
upwards.
2. Remove the inner blades [
C] one at a
time.
Do not touch the edges (metal parts) of
the inner blades to prevent injury to your
hand.
3. Insert the inner blades [
C] one at a time
until they click.
1
2
3
Cleaning the self‑cleaning recharger
Beard trimmings may become attached to the cleaning tray of
the self‑cleaning recharger. Follow the steps below to remove
them. We recommend doing this each time you change the
detergent cartridge.
1.
Be sure to remove the water tank [F]
and the appliance plug from the self‑
cleaning recharger [F].
Be careful not to spill the cleaning liquid.
2. Gently wipe off any beard trimmings
attached to the inside of the cleaning tray
with a cloth or tissue paper dampened
with water.
Clean the corners and uneven parts of
the cleaning tray with a cotton swab
dampened with water.
Do not pull hard on the rubber blade protector (a) at the
bottom of the cleaning tray. The rubber may come off if you
pull hard on it. It is only necessary to pull it up slightly.
Warning
Do not wash or apply water to the AC adaptor or self‑
cleaning recharger. Failure to observe this may cause
electric shock or result in short circuits.
ES-LV81_EU.indb 13 2011/02/16 14:34:05
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic ES-LV81 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic ES-LV81 in the language / languages: All languages as an attachment in your email.

The manual is 42,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info