Maintenance
Lubrication
To maintain shaving comfort for a long time, it is
recommended that the oil provided with the shaver is used.
1. Switch off the shaver.
2. Apply one drop of oil to each of the outer
foils.
3. Raise the trimmer and apply a drop of
oil.
4. Switch the shaver on, and run it for
approximately five seconds.
5. Switch off the shaver, and wipe off any
excess oil from the outer foils with a soft
cloth.
It is not necessary to oil the blades after
cleaning the shaver with the self‑cleaning
recharger. (Lubricant is included in the
cleaning detergent.)
•
Replacing the system outer foil and the inner
blades
appears on the LCD panel once a year. (This will differ
depending on usage.) We recommend checking the system
outer foil and the inner blades when it appears.
Press the Power switch for more than 30 seconds to turn off
.
system outer foil once every year
inner blades once every two years
Drying the shaver with the self‑cleaning recharger
1. Attach the outer foil section [
B] to the shaver.
2. Dry the shaver with self‑cleaning recharger [
F] using
“Dry/Charge” course.
3. Lubricate the shaver.
Cleaning with the brush
Clean the inner blades [C] using
the short brush by moving it in
direction (A).
Clean the system outer foil
[B2], the shaver body and the
trimmer [D9] using the long
brush.
Do not move the short brush in
direction (B) as it will damage
the inner blades and affect their
sharpness.
•
