523097

Panasonic drm-es10 Manual

19
Zoom out
Zoom in
Previous page
1/48
Next page
RQT8009
19
Recording
You can enter up to 16 programs up to a month in advance. (Each
daily or weekly program is counted as one program.)
• When connecting a cable TV box or satellite receiver, select the
channel on the cable TV box or satellite receiver before the
scheduled recording starts.
1 Press [SCHEDULE].
2 Press [e, r] to select “New
Scheduled Recording” and press
[ENTER].
3 Press [q] to move through the items
and change the items with [e, r].
• Press and hold [e, r] to alter On (Start time) and Off (Finish
time) in 30-minute increments.
• You can also set Channel, Date, On (Start time), and Off
(Finish time) with the numbered buttons.
• You can also press [REC MODE] to change the recording
mode.
• DATE
• Title Name
Press [w, q] to select “Title Name” and press [ENTER]
(➔ page 31).
4 Press [ENTER].
Repeat steps 2–4 to schedule other recordings.
5 Press [SCHEDULE].
The message “Turn recorder off for Scheduled Recording.” is
shown on the television.
6 Press [^ DVD POWER].
The unit turns off and “z” lights on the unit’s display to
indicate scheduled recording standby has been activated.
• Even if the unit is in scheduled recording standby, you can play a
disc. Without pressing [^ DVD POWER], just press [q] (PLAY) or
[DIRECT NAVIGATOR]. Scheduled recording works even during
play.
• Even when the unit is turned off, you can display the schedule list
by pressing [SCHEDULE].
Press [SCHEDULE].
■ To change a program
Press [e, r] to select the program and press [ENTER].
(➔ left, step 3)
■ To delete a program
Press [e, r] to select the program and press [ CANCEL] or
[ADD/DLT].
■ To exit the schedule list
Press [SCHEDULE].
The message “Turn recorder off for Scheduled Recording.” is shown
on the television.
■ To put the unit on scheduled recording standby
Press [^ DVD POWER].
The unit turns off and “z” lights on the unit’s display to indicate
scheduled recording standby has been activated.
•
Programs that failed to record are displayed gray. They are
automatically deleted from the schedule list at 4 a.m. two days later.
• During scheduled recording, you can change the end time as long
as the recording mode is not “FR”.
Manually programming scheduled
recordings
■ To release the unit from recording standby
Press [^ DVD POWER].
The unit turns on and “z” goes out.
• Be sure to press [^ DVD POWER] to return the unit to standby
mode before the scheduled recording time. Scheduled recording
will work only if “z” is displayed.
■ To cancel recording when recording has
already begun
Press [g], then [ENTER] within 5 seconds.
• You can also press and hold [g] on the main unit for more than 3
seconds to stop recording.
RAM
-RW(V) +R-R
SCHEDULE
LIST
Remaining Recording Time 1:58 SP
3/26 TUE 12:53 PM
SP5:10 PM4:20 PM39 4 / 1 MON01
ModeOffOnNo Channel Date
OK
Check
New Scheduled Recording
SCHEDULED
RECORDING
Remaining Recording Time 1:58 SP
3/26 TUE 12:53 PM
5:10 PM4:20 PM4 / 1 MON SP39
Title Name
ModeOffOnChannel Date
Date: Current date up to one month later minus
one day
Daily timer: Sun-Sat
→ Mon-Sat → Mon-Fri
Weekly timer: Weekly Sun
→ --- → Weekly Sat
New Scheduled Recording
Check to make
sure “OK” is
displayed.
RAM
Note
• “z” flashes when the unit cannot go to scheduled recording
standby (e.g., a recordable disc is not in the disc tray).
• When you program successive scheduled recordings to start
immediately one after the other, the unit cannot record the part at
the beginning of the later programs (a few seconds when
recording with DVD-RAM and approximately 30 seconds when
recording with DVD-R, DVD-RW (DVD-Video format) or +R).
• If you set DST (Daylight Saving Time) to On when manually
setting the clock (➔ page 34), scheduled recording may not work
when summer switches to winter and vice versa.
Check, change or delete a program
RAM
-RW(V) +R-R
No.
SCHEDULE
LIST
Remaining Recording Time 1:58 SP
3/26 TUE 12:53 PM
--
0 9
Cancel
Press ENTER to store new schedule.
ModeOffOnNo Channel Date
New Scheduled Programing
Check
Icons
This program is currently recording.
The times overlap those in another program. Recording of
the program with the later start time starts when the earlier
program finishes recording.
You stopped a weekly or daily scheduled recording. The icon
disappears the next time the scheduled program starts
recording.
The disc was full so the program failed to record.
The material was copy-protected so it was not recorded.
The program did not complete recording because the disc is
dirty or for some other reason.
W
F
X
Message displayed in the Check line
Displayed if the recording can fit in the remaining
space.
For recordings made daily or weekly, the display
will show until when recordings can be made (up to
a maximum of one month from the present time)
based on the time remaining on the disc.
It may not be possible to record because:
• the disc is write-protected
• there is no more space left
• the number of possible titles has reached its
maximum.
OK:
→ (Date):
! :
… 19 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic drm-es10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic drm-es10 in the language / languages: English as an attachment in your email.

The manual is 3,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info