523097
18
Zoom out
Zoom in
Previous page
1/48
Next page
RQT8009
18
Recording
Scheduled recording
You can enter up to 16 programs up to a month in advance.
When connecting a cable TV box or satellite receiver, the VCR
Plus+ system does not work. Program the scheduled recording
manually and select the channel on the cable TV box or satellite
receiver before the scheduled recording starts.
Preparation
Turn on the television and select the appropriate video input to suit
the connections to this unit.
Check that the time on the unit is correct.
Entering VCR Plus+ numbers is an easy way of scheduled
recording. You can find these codes in TV listings in newspapers and
magazines.
1 Press [VCR Plus+].
2 Press the numbered buttons to enter
the PlusCode number.
To correct the number
Press [w] to move back to correct a digit.
3 Press [ENTER].
When “XP” is displayed in the unit’s display, the recording
mode automatically changes to “FR” in order to prevent loss
of recording when there is not enough space. Change to
“XP” mode if you want to set the scheduled recording using
“XP” mode.
Confirm the program and make corrections if necessary
using [e, r, w, q] ( page 19, step 3).
You can also press [REC MODE] to change the recording
mode.
Title Name
Press [w, q] to select “Title Name” and press [ENTER]
(page 31).
4 Press [ENTER].
The settings are stored.
Repeat steps 1–4 to program other recordings.
5 Press [SCHEDULE].
The message “Turn recorder off for Scheduled Recording.” is
shown on the television.
6 Press [^ DVD POWER].
The unit turns off and “z” lights on the unit’s display to
indicate scheduled recording standby has been activated.
Even if the unit is in scheduled recording standby, you can play a
disc. Without pressing [^ DVD POWER], just press [q] (PLAY) or
[DIRECT NAVIGATOR]. Scheduled recording works even during
play.
Using VCR Plus+ system to make
scheduled recordings
TV
ADD/DLT
OPEN/CLOSE
SKIP SLOW/SEARCH
REC MODE ERASE
REC
POWER
F Rec
TIME SLIP
FUNCTIONSDIRECT NAVIGATOR
TOP MENU
RETURN
VOLUME
CH
INPUT SELECT
STATUS
DISPLAY
SUB MENU
DVD POWER
TV/VIDEO
SETUP
CREATE
CHAPTER
SCHEDULE
CM SKIP
AUDIO
CANCEL
VCR Plus+
Numbered
buttons
^ DVD POWER
ADD/DLT
e, r, w, q
ENTER
q
VCR Plus+
REC MODE
SCHEDULE
DIRECT
NAVIGATOR
g
CANCEL
RAM
-RW(V) +R-R
No.
VCR Plus+ Remaining Recording Time 1:58 SP
3/26 TUE 12:53 PM
--
0 9
Enter the PlusCode with the numbered buttons.
To release the unit from recording standby
Press [^ DVD POWER].
The unit turns on and “z” goes out.
Be sure to press [^ DVD POWER] to return the unit to standby
mode before the scheduled recording time. Scheduled recording
will work only if “z” is displayed.
To cancel recording when recording has
already begun
Press [g], then [ENTER] within 5 seconds.
You can also press and hold [g] on the main unit for more than 3
seconds to stop recording.
Note
z” flashes when the unit cannot go to scheduled recording
standby (e.g., a recordable disc is not in the disc tray).
The actual time recorded may be longer than the program itself
when television programs are recorded using VCR Plus+.
When you program successive scheduled recordings to start
immediately one after the other, the unit cannot record the part at
the beginning of the later programs (a few seconds when
recording with DVD-RAM and approximately 30 seconds when
recording with DVD-R, DVD-RW (DVD-Video format) or +R).
If you set DST (Daylight Saving Time) to On when manually
setting the clock ( page 34), scheduled recording may not work
when summer switches to winter and vice versa.
SCHEDULED
RECORDING
Remaining Recording Time 1:58 SP
3/26 TUE 12:53 PM
5:10 PM4:20 PM4 / 1 MON
ModeOffOnChannel Date
SP39
Title Name
SCHEDULE
LIST
Remaining Recording Time 1:58 SP
3/26 TUE 12:53 PM
SP5:10 PM4:20 PM39 4 / 1 MON01
ModeOffOnNo Channel Date
New Scheduled Recording
OK
Check
Check to make
sure “OK” is
displayed.
RAM
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic drm-es10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic drm-es10 in the language / languages: English as an attachment in your email.

The manual is 3,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info