734634
37
Zoom out
Zoom in
Previous page
1/46
Next page
- 37 -
Reference
You have forgotten your ratings password.
You want to cancel the ratings level.
h The ratings level returns to the factory
defaults.
1 While the unit is on
Press and hold [OK], the yellow button and
the blue button on the remote control at the
same time for more than 5 seconds.
POWER LED starts to flash, and “00 RET”
is displayed on the screen.
2 Press [1] (right) repeatedly on the remote
control until “03 VL” is displayed on the
screen.
3 Press [OK].
The TV screen turns black.
h In the following cases, HDMI authentication
takes place and a black screen is displayed:
When “24p Output” is set to “Automatic”.
When the display is switched between 2D
and 3D images.
When you quit the 4K playback by
displaying another screen, including the
HOME menu.
[UB420] When “HDMI Output Settings of
Music Playback” is set to “Sound Quality
Priority”.
This unit does not recognize the USB
connection correctly.
h Disconnect and re-connect the USB cable. If
it still does not recognize the connection, turn
this unit off and on again.
h USB devices may not be recognized by this
unit when connected using the following :
a USB hub
a USB extension cable
h If you connect USB HDD to this unit, use the
USB cable that is supplied with the HDD.
h If the USB HDD is not recognized, the power
to the USB HDD may not be supplied. Supply
power from an external source.
h [UB420] If you connect a second USB device
while a screen other than the Home screen is
displayed, it will not be detected. Display the
Home screen and reconnect the USB device
you want to use.
Images from this unit do not appear on the TV
screen, or they are distorted.
h An incorrect resolution is selected in “Video
Format”. Reset the setting as follows:
h The connected devices are changed. Reset
the setting as follows:
1 While the unit is on
Press and hold [OK], the yellow button and
the blue button on the remote control at the
same time for more than 5 seconds.
POWER LED starts to flash.
2 Press [8] and the blue button on the remote
control at the same time for more than
5 seconds.
Set the item again. (> 29)
When Dolby Digital Plus, Dolby TrueHD,
and DTS-HD
®
audio are not output properly,
select “Yes” in “Default Settings” (> 35) and
make proper settings.
4K(50p/60p) Output” will be set to “Off”.
Make the correct setting again. (> 29)
h PAL discs cannot be correctly viewed on an
NTSC TV.
h When “3D BD-Video Playback” in the Setup
menu is set to “Automatic”, images may not
be output depending on the connection
method. After removing the disc from this unit,
select “Set before play” in the Setup menu,
and select “2D Playback” in the setup screen
displayed when playing 3D discs. (> 32)
h When outputting in 4K, images may be
distorted depending on the HDMI cable. Use
an HDMI cable that supports 18 Gbps.
[UB420]
Video is not output.
h Video is not output when the “High Clarity
Sound” is set to “On (Video Off)”. (> 28)
h Video from the HDMI AUDIO OUT terminal is
not output when the “HDMI(AUDIO) Output
Mode” is set to “Audio Only”. (> 29)
Picture
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic DP-UB420 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic DP-UB420 in the language / languages: English as an attachment in your email.

The manual is 1,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic DP-UB420

Panasonic DP-UB420 User Manual - German - 46 pages

Panasonic DP-UB420 User Manual - Dutch - 46 pages

Panasonic DP-UB420 User Manual - French - 46 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info