734634
36
Zoom out
Zoom in
Previous page
1/46
Next page
- 36 -
Reference
Troubleshooting guide
Before requesting service, please perform the
following checks.
If the problem remains unresolved, consult
your dealer for instructions.
The following do not indicate a problem with
this unit:
Regular disc rotating sounds.
Image disturbance during search.
Image disturbance when replacing 3D discs.
Unit does not respond to remote
control or unit’s buttons.
Press and hold [Í/I] on the main unit for
3 seconds.
If still unable to turn the unit off, disconnect the
AC mains lead, wait 1 minute, then reconnect
the AC mains lead.
Cannot eject disc.
1 While the unit is on
Press and hold [OK], the yellow button and
the blue button on the remote control at the
same time for more than 5 seconds.
POWER LED starts to flash, and “00 RET”
is displayed on the screen.
2 Press [1] (right) repeatedly on the remote
control until “06 FTO” is displayed on the
screen.
3 Press [OK].
To return to the factory default.
h Select “Yes” in “Default Settings” in the Setup
menu. (> 35)
To return all settings to the factory preset.
h Reset the unit as follows:
1 While the unit is on
Press and hold [OK], the yellow button and
the blue button on the remote control at the
same time for more than 5 seconds.
POWER LED starts to flash, and “00 RET”
is displayed on the screen.
2 Press [1] (right) repeatedly on the remote
control until “08 FIN” is displayed on the
screen.
3 Press and hold [OK] for more than 5 seconds.
This unit is turned off when the input for the
TV is switched.
h This is a normal phenomenon when using
VIERA Link. For details please read the
operating instructions for the TV.
The remote control doesn’t work properly.
h Change the batteries in the remote control.
(> 5)
h The remote control and this unit are using
different codes.
Turn on this unit by using [Í/I] on the main
unit, and check “Remote Control ”, which is
displayed on the screen when you press a
button on the remote control.
Press and hold [OK] and the displayed
number (“”) for more than 5 seconds.
This unit is turned off automatically.
h To save on electricity, this unit is turned off
automatically depending on the media if there
is no button operation for about 20 minutes
when not playing back (such as when paused
or displaying the menu, displaying still
pictures, etc.).
Do you have the latest firmware installed?
Panasonic is constantly improving the unit’s
firmware to ensure that our customers are
enjoying the latest technology. (> 18)
General operation
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic DP-UB420 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic DP-UB420 in the language / languages: English as an attachment in your email.

The manual is 1,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic DP-UB420

Panasonic DP-UB420 User Manual - German - 46 pages

Panasonic DP-UB420 User Manual - Dutch - 46 pages

Panasonic DP-UB420 User Manual - French - 46 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info