Manual Panasonic DMR-EZ49V (page 65 of 88) (English)

476028

Zoom out

Zoom in

1/88

VQT2J52

Setting menus

(All factory default settings are indicated with underlined text.)

Refer to the operating instructions for connected devices to verify

whether or not they can decode each of the audio formats.

(All factory default settings are indicated with underlined text.)

Sound

Dynamic Range Compression

[DVD-V] (Dolby Digital only)

Change the dynamic range for late night viewing.

[On] [Off

]

Bilingual Audio Selection

(Analogue broadcast only)

Select whether to record the main or secondary audio type when:

≥Recording or copying to a DVD-R, DVD-R DL, DVD-RW (DVD-

Video format), +R, +R DL and +RW.

≥Recording or copying sound in LPCM (> below, “Audio Mode for

XP Recording”).

[M 1

][M2]

≥You cannot select the audio on this unit when recording from an

external source, such as when copying from a video cassette

recorder. Select the audio on the other equipment.

Digital Audio Output

Change the settings when you have connected equipment through

this unit’s Digital Audio Output terminal (> 70, 71).

≥Press [OK] to show the following settings.

PCM Down Conversion

Select how to output audio with a sampling frequency of 96 kHz.

≥Signals are converted to 48 kHz despite the settings below if

the signals have a sampling frequency of over 96 kHz, or the

disc has copy protection.

[On] Signals are converted to 48 kHz. (Choose when the

connected equipment cannot process signals with a

sampling frequency of 96 kHz.)

[Off

] Signals are output as 96 kHz. (Choose when the

connected equipment can process signals with a

sampling frequency of 96 kHz.)

Dolby Digital

Select how to output the signal.

Select “Bitstream” if the connected equipment decodes the signal.

Select “PCM” if this unit decodes the signal and outputs it as 2 channels.

≥Not making the proper settings may result in noise.

[Bitstream

] When connected to equipment with a built-in Dolby

Digital decoder.

[PCM] When connected to equipment without a built-in

Dolby Digital decoder.

DTS

Select how to output the signal.

Select “Bitstream” if the connected equipment decodes the

signal.

Select “PCM” if this unit decodes the signal and outputs it as 2

channels.

≥Not making the proper settings may result in noise.

[Bitstream

] When connected to equipment with a built-in DTS

decoder.

[PCM] When connected to equipment without a built-in

DTS decoder.

MPEG

Select how to output the signal.

Select “Bitstream” if the connected equipment decodes the signal.

Select “PCM” if this unit decodes the signal and outputs it as 2

channels.

≥Not making the proper settings may result in noise.

[Bitstream] When connected to equipment with a built-in

MPEG decoder.

[PCM

] When connected to equipment without a built-in

MPEG decoder.

Audio Mode for XP Recording

Choose the audio type when recording or copying with XP mode.

[Dolby Digital

] (> 85) [LPCM] (> 85)

≥The picture quality of LPCM recordings may be lower than that of

normal XP mode recordings.

≥The audio recording becomes Dolby Digital even if you selected

LPCM when using a recording mode other than XP.

≥When recording a bilingual broadcast, select the type of audio in

advance from “Bilingual Audio Selection” (> above).

Display

Language

Choose the language for these menus and on-screen messages.

[For]Germany[and]Austria[

[English] [Deutsch

]

[For]Italy[and[Spain]

[English

] [Deutsch] [Français] [Italiano]

[Español]

On-Screen Messages

Choose the approximate time until the digital channel information

screen (> 17) disappears automatically.

The length of time the control panel (> 43) is displayed can also

be changed, but “Off” does not work.

[Off] (The digital channel information is not displayed.)

[3 sec.] [5 sec.] [7 sec.] [10 sec.]

[For]Germany[and]Austria[

Grey Background

Select “Off” if you do not want to have the unit show the grey

background when tuner reception is weak.

[On

] [Off]

Unit’s Display

Changes the brightness of the unit’s display.

This setting is fixed with “Automatic” if you set “Power Save in

Standby” to “On” or “On Timer” (> 67).

[Bright

] [Dim]

[Automatic] The display turns dark during play and disappears

when the unit is turned off. When “Power Save in

Standby” is activated (> 67), power consumption

while in standby mode is reduced.

Screen Saver

[On] When this unit is not operated for approximately 5 minutes

while the screen is being displayed, the screen saver is

displayed. To return to the previous screen, press [OK].

[Off]

FUNCTION MENU Display

[On] When the unit is turned on, the FUNCTION MENU will be

displayed. (> 7)

[Off]

DMR-EZ49VEGEC-VQT2J52_eng.book 65 ページ２０１０年１月７日　木曜日　午後４時０分

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic DMR-EZ49V in the language / languages: English as an attachment in your email.

The manual is 14,09 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic DMR-EZ49V

Panasonic DMR-EZ49V User Manual - German - 88 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Panasonic DMR-EZ49V Manual

Product: