456889
63
Zoom out
Zoom in
Previous page
1/80
Next page
63
RQTV0134
Picture Page
Sound Page
TV reception worsens after
connecting the unit.
This can occur because the signals are being divided between the unit and other equipment. It can
be solved by using a signal booster, available from audio-visual suppliers.
The images from the unit do
not appear on the TV.
Picture is distorted.
Make sure that the TV is connected to the VIDEO OUT terminal, S VIDEO OUT terminal or
COMPONENT VIDEO OUT terminals on the unit.
Make sure that the TV’s input setting (e.g., VIDEO 1) is correct.
The TV isn’t compatible with progressive signals. Press and hold [] and [ DVD] on the main unit at
the same time for about 5 seconds. The setting will change to interlace.
13–15
Status messages do not
appear.
Select “Automatic” in “Status Messages” in the Setup menu. 58
The blue background does
not appear.
Select “On” in “Blue Background” in the Setup menu. 58
The 4:3 aspect ratio picture
expands left and right.
Screen size is wrong.
Use the TV to change the aspect. If your TV does not have that function, set “Progressive” in the
Video menu to “Off”.
Check the settings for “TV Type”, “4:3 TV Settings for DVD-Video”, or “4:3 TV Settings for DVD-
RAM” in the Setup menu.
37
58
There is a lot of after-image
when playing video.
Set “DNR” in the Video menu to “Off”. 37
When playing DVD-Video
using progressive output,
one part of the picture
momentarily appears to be
doubled up.
Set “Progressive” in the Video menu to “Off”. This problem is caused by the editing method or
material used on DVD-Video, but should be corrected if you use interlace output.
37
There is no apparent change
in picture quality when
adjusted with the Video menu
in the on-screen menus.
The effect cannot be seen with certain types of video.
No sound.
Low volume.
Distorted sound.
Cannot hear the desired
audio type.
Check the connections and “Digital Audio Output” settings. Check the input mode on the amplifier if
you have connected one.
Press [AUDIO] to select the audio.
Set “V. Surround Sound” in the Audio menu to “Off” in the following cases.
- When using discs that do not have surround sound effects such as Karaoke discs.
- When playing MTS broadcast titles.
15, 57
25, 31
37
Cannot switch audio. You cannot change the audio type when a DVD-R, a DVD-R DL, a DVD-RW (DVD-Video format), a
+R, a +R DL or a +RW is in the disc tray.
You cannot change the audio type when playing a DVD-R, a DVD-R DL, a DVD-RW (DVD-Video
format), a +R, a +R DL or a +RW. (You can select “Main” or “Secondary Audio Program (SAP)” in
“Multi-channel TV sound (MTS)” in the Setup menu before recording.)
You have used a digital connection. Set “Dolby Digital” to “PCM” or connect using audio cables
(analog connection).
There are discs whose audio cannot be changed because of how the disc was created.
57
15, 57
Troubleshooting guide
M6VP&PC.book 63 ページ 2006年2月6日 月曜日 午後3時20
63


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic DMR-ES35 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic DMR-ES35 in the language / languages: English as an attachment in your email.

The manual is 4,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic DMR-ES35

Panasonic DMR-ES35 User Manual - German - 60 pages

Panasonic DMR-ES35 User Manual - Dutch - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info