3291

Panasonic DMR-ES15 Manual

21
Zoom out
Zoom in
Previous page
1/104
Next page
RQT8318
21
ENGLISH
21
Recording broadcasts from an external equipment
Preparation
• Insert a disc (➔ page 16).
• When recording a bilingual programme (➔ page 14).
To make a timer recording with your television, connect to a
television with a Q Link function (➔ page 38) that you can use for
setting timer recordings using a fully wired 21-pin Scart cable
(➔ page 8, 9).
1 Make timer programming on the TV.
2 Turn off the unit.
The start and end of recording is controlled by TV.
To stop recording
Press [g].
Note
• When this unit is in EXT LINK standby (“EXT-L” on the unit’s
display), recording from TV does not start.
• Programmes are recorded as one title on this unit when the end
time of the earlier timer recording and the start time of the later
timer recording are close to each other.
To divide the titles, go to “Divide Title” (➔ page 31).
Preparation
• Connect a digital/satellite receiver or decoder to this unit’s input
terminals (➔ page 9).
• When the output signal from the external equipment is NTSC,
change the “TV System” to “NTSC” in the Setup menu
(➔ page 43).
1 While stopped
Press [INPUT SELECT] to select the
input channel for the equipment you
have connected.
e.g.,
If you have connected to AV2 input terminals, select “AV2”.
2 Press [REC MODE] to select the
recording mode.
3 Select the channel on the other
equipment.
4 Press [* REC].
Recording starts.
To skip unwanted parts
Press [h] to pause recording. (Press again to restart recording.)
To stop recording
Press [g].
To record programmes from a digital/satellite receiver using timer
programming
Preparation
• Make sure you connect the AV2 input terminal of this unit to “VCR
Scart Terminal” of a digital/satellite receiver with a 21-pin scart
cable (➔ page 9).
• Set the “AV2 Input” and “Ext Link” to match the connected
equipment in the Setup menu (➔ page 41).
1 Make timer programming on the
external equipment.
2 Press [EXT LINK].
The unit turns off and “EXT-L” lights on the unit’s display to
indicate timer recording standby has been activated.
To cancel the external control
Press [EXT LINK] to stop recording or to cancel linked timer
recording standby.
• In order to prevent accidental operation, press [EXT LINK] to
cancel the setting after recording is finished.
For your reference
• This function does not work with some equipment. Refer to the
equipment’s operating instructions.
• The beginnings of recordings may not be recorded correctly in
some cases.
• When “Ext Link” is set to “Ext Link 2”, this function does not work if
the input signal is NTSC system.
• When “AV2 Connection” is set to “Decoder”, EXT LINK is not
available (
➔
page 41).
• Programmes are recorded as one title on this unit when the end
time of the earlier timer recording and the start time of the later
timer recording are close to each other.
To divide the titles, go to “Divide Title” (➔ page 31).
• While the unit is in EXT LINK standby mode or recording, video
picture is from the AV2 input terminal irrespective of “AV1 Output”
setting.
Making timer recordings on the
television
(e.g., of digital broadcasts)
g
EXT LINK
CH
EXT LINK
AV3
DV IN
gEXT LINK
* REC
REC MODE
INPUT
SELECT
h
* REC
RAM -R -R DL -RW(V) +R +R DL +RW
RAM
Recording from digital/satellite
receiver or decoder
Linked timer recordings with external
equipment (digital/satellite receiver)–
EXT LINK
RAM
Timer recording/Recording broadcasts from an external equipment
… 21 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic DMR-ES15 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic DMR-ES15 in the language / languages: English, German as an attachment in your email.

The manual is 5,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic DMR-ES15

Panasonic DMR-ES15 Quick start guide - English - 2 pages

Panasonic DMR-ES15 User Manual - Dutch - 53 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info