3291
20
Zoom out
Zoom in
Previous page
1/104
Next page
RQT8318
20
20
Timer recording
Refer to the control reference on page 18.
Even when the unit is turned off, you can display the timer recording list by pressing [PROG/CHECK].
Press [PROG/CHECK].
To change a programme
Press [e,r] to select the programme and press [ENTER]. (page 19, Manually programming timer recordings, step 3)
To delete a programme
Press [e,r] to select the programme and press [ ].
To exit the timer recording list
Press [PROG/CHECK].
Programmes that failed to record are deleted from the timer recording list at 4 a.m. two days later.
VPS (Video Programme System) or PDC (Programme Delivery Control) is a very convenient system which records exactly from beginning to end
of the TV programmes set in timer recording, even if the actual broadcasting time differs from the scheduled time due to delayed start or extension
of the programme duration. Also, if a programme is interrupted, for example, some special news is inserted, the recording will be paused
automatically and resumed when the programme continues.
Note
The beginnings of recordings may not be recorded correctly in some cases.
Depending on the signals sent from the TV stations, the VPS/PDC system may not work property even when “VPS/PDC” has been set to “ON”.
Please check with the broadcasters in your area for details.
VPS/PDC does not activate while this unit is on. The system stays inactive under the condition even if its setting is “ON”. In such cases,
recording starts and finishes at times you set initially.
Check, change or delete a programme
VPS/PDC function
When VPS/PDC recording Use VPS/PDC time for recording the TV programmes.
Set “VPS/PDC” to “OFF” when the recording time is not VPS/PDC time.
VPS/PDC recording is not performed when VPS/PDC time is incorrect, even if only by one
minute. To find out VPS/PDC time, consult Teletext, a newspaper or magazine, or other source.
If a programme listed in a newspaper or magazine has two S
HOWVIEW numbers, use the
S
HOWVIEW number for VPS/PDC if you wish to proceed with VPS/PDC recording using
S
HOWVIEW programming.
The default setting for “VPS/PDC” is “OFF”.
When the VPS/PDC signal drops out
because the broadcast signal is weak.
When a TV station does not transmit a
regular VPS/PDC signal.
Timer recording will be performed in the normal mode (without VPS/PDC) even if it was
programmed for VPS/PDC.
In this case, even if the timer recording is performed, whatever has been programmed will not be
cancelled at that particular time but at 4 a.m. two days later.
If the start times of scheduled
programmes listed in the newspaper or
magazine change at a later date.
Set “VPS/PDC” to “OFF” when programming a programme whose start time has been
subsequently changed.
CANCEL
S
SUB MENU
Timer Off
A
Timer
Recording
Remain
8:17:23 7. 5. SUN
1:57 SP
NameNo.
Press ENTER to store new programme.
Date
7. 5. SUN
Start
19:00
New Timer Programme
Stop
20:00
Mode
SP
VPS
PDC
---
Drive
space
OK
ENTER
RETURN
ARD01
Icons
Timer recording standby is activated.
This programme is currently recording.
The times overlap those in another
programme. Recording of the programme
with the later start time starts when the
earlier programme finishes recording.
You stopped a weekly or daily timer
recording. The icon disappears the next
time the timer programme starts recording.
The disc was full so the programme failed to
record.
The material was copy-protected so it was
not recorded.
The programme did not complete recording
because the disc is dirty or some other
reason.
W
F
X
Message displayed in the “Drive space” line
OK: Displayed if the recording can fit in
the remaining space.
o (Date): For recordings made daily or
weekly, the display will show until
when recordings can be made (up
to a maximum of one month from
the present time) based on the
time remaining on the disc.
!: It may not be possible to record
because:
the disc is write-protected
there is no more space left
the number of possible titles has
reached its maximum.
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic DMR-ES15 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic DMR-ES15 in the language / languages: English, German as an attachment in your email.

The manual is 5,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic DMR-ES15

Panasonic DMR-ES15 Quick start guide - English - 2 pages

Panasonic DMR-ES15 User Manual - Dutch - 53 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info