457746
97
Zoom out
Zoom in
Previous page
1/120
Next page
Convenient functions
VQT3C73
97
Software (Firmware) Update
Software of this unit can be updated automatically by the
following methods at the specified time.
(Default setting is 3 a.m. > 96, Software Update in Standby)
From broadcasts
From Internet
§
To update the Software (Firmware) immediately, use
the following function:
Software Update Now ( Broadcast ) (> 96)
Software of this unit will be updated from broadcasts if
update information is detected.
Software Update Now ( Internet )
§
(> 96)
Software of this unit will be updated from Internet if
update information is detected.
§
Network connection and setting are required. (> 16,
23)
The unit’s display during the update
e.g.,
When “FINISH” is displayed, update of the software
(firmware) has completed.
It may take up to a few hours until the update is completed depending on
the network or broadcast environment.
If the timer recording is scheduled within the following time at the start of
the download, the download will not be executed.
– From broadcast: Within 4 hours
– From Internet: Within 1 hour
You can also download the latest software (firmware) from the following
website and burn it to a CD-R to update the software (firmware).
http://panasonic.jp/support/global/cs/
If you do not want to perform the software (firmware) update, set the
“Software Update in Standby” to “Off”. (> 96)
Software (firmware) of CAM (compatible CI Plus) can be
updated automatically from broadcasts.
Availability of software (firmware) update is detected while
viewing the programmes compatible with CI Plus.
1 When notification is displayed on the
screen, select “Yes” and press [OK].
If for some reason the notification is not displayed,
or if cancelled, the notification is instead displayed
on the Channel information (> 28).
e.g.,
To execute CAM software upgrade, press the “Red
button.
2 Follow the instructions on the screen.
The unit’s display during the update
Do not remove the CAM from this unit while updating.
CAM software (firmware) update notice is not displayed in the following
cases:
When recording a programme
– When timer recording and CAM update occur simultaneously
When displaying FUNCTION MENU, DIRECT NAVIGATOR, etc.
Operations such as view, playback, or record cannot be performed while
upgrading the CAM.
Any buttons on the remote control or the unit cannot be used while
upgrading the CAM.
If the timer recording is started, CAM software upgrade is cancelled to
start recording.
For details, refer to your CAM’s operating instructions or consult your
dealer.
You cannot operate the unit until the update is
complete. Removing the AC mains lead while the
update is in progress may damage the unit. Don’t
remove the AC mains lead during the update.
Update software (firmware) of
this unit
CI Plus compatible CAM
software (firmware) update
1
All DVB Channels
10:30
NEWS
9:00 - 11:00
Now
Dolby DEncrypted
Change category
CAM Upgrade Info
DMRBST800700701EG_eng.book 97 ページ 2011年4月26日 火曜日 午後5時27分
97


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic DMR-BST700 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic DMR-BST700 in the language / languages: English as an attachment in your email.

The manual is 5,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic DMR-BST700

Panasonic DMR-BST700 User Manual - German - 120 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info