603026

Panasonic DMPBDT100EG Manual

33
Zoom out
Zoom in
Previous page
1/320
Next page
33
VQT2U34
ENGLISH
The images from this unit do not appear on
the television.
Picture is distorted.
¾
An incorrect resolution is selected in “Component
Resolution” or “HDMI Video Format”. Reset the setting
as follows:
1 While the unit is on, press and hold [OK], the yellow
button and the blue button on the remote control at the
same time for more than 5 seconds.
– “00 RET” is displayed on the unit’s display.
2 Repeatedly press [1] (right) on the remote control or
[Í/I] on the unit until “04 PRG” is displayed on the unit’s
display.
3 Press and hold [OK] on the remote control or [< OPEN/
CLOSE] on the unit for at least 3 seconds.
Set the item again. (> 30)
– When Dolby Digital Plus, Dolby TrueHD, and DTS-HD
audio are not output in bitstream, select “Yes” in “Default
Settings” and make proper settings. (> 31)
¾
The unit and television are using different video
systems. While stopped, keep pressing [∫] and
[< OPEN/CLOSE] on the main unit for 5 or more
seconds. The system switches from PAL to
NTSC
or
vice versa.
¾
The system used on the disc doesn’t match your
television.
– PAL discs cannot be correctly viewed on an NTSC
television.
– This unit can convert NTSC signals to PAL60 for
viewing on a PAL television (“NTSC Contents Output”
in the “Picture”).
¾
When “Playback method for 3D disc” in the Setup menu
is set to “3D Playback”, images may not output
depending on the connection method. Remove the disc
from this unit and select “2D Playback”. (> 28)
Video is not output in high-definition.
¾
Confirm that the “HDMI Video Mode”, “HDMI Video
Format”, and “Component Resolution” in the Setup
menu are set properly. (> 30)
¾
The video output resolution is restricted to “576p/480p”
when DVD-Video discs, DivX and BD-Video discs
recorded at a rate of 50 field per second are output from
the COMPONENT VIDEO OUT terminals.
3D video is not output.
¾
Is there a non-3D compatible amplifier/receiver
connected between this unit and a TV? (> 10)
¾
Are the settings on this unit and the TV correct? (> 20)
¾
Is the amplifier/receiver that is connected between this
unit and TV on?
3D video is not output correctly as 2D.
¾
Is the “Playback method for 3D disc” set to “2D
Playback”? (> 28)
¾
Discs that have recorded titles with Side by side (2
screen structure) which can be enjoyed in 3D are played
back in accordance with the settings of the TV.
A black band is displayed around the edge
of the screen.
The aspect ratio of the screen is abnormal.
¾
Confirm the “TV Aspect” is set properly. (> 30)
¾
Adjust the aspect setting on the television.
(Adjustment using “Screen Aspect” (> 17) on the unit is
also possible.)
Cannot switch audio.
¾
When connecting an amplifier/receiver using an
OPTICAL terminal or an HDMI terminal, you cannot
switch the audio if “Digital Audio Output” is set to
“Bitstream”. Set “Digital Audio Output” to “PCM” or
connect using AUDIO OUT terminal. (> 9, 29)
Cannot hear the desired audio type.
¾
Check the connections and the “Digital Audio Output”
settings. (> 29)
¾
To output audio from a device connected with an HDMI
cable, set “HDMI Audio Output” to “On” in the Setup
menu. (> 30)
Picture
Audio
(33)
DMP-BDT100EG-VQT2U34.book 33 ページ ２０１０年６月２２日　火曜日　午前１１時０分
… 33 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic DMPBDT100EG at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic DMPBDT100EG in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Spanish as an attachment in your email.

The manual is 10,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic DMPBDT100EG

Panasonic DMPBDT100EG User Manual - German, Dutch, Danish, French, Italian - 320 pages

Panasonic DMPBDT100EG User Manual - Polish - 48 pages

Panasonic DMPBDT100EG User Manual - Swedish, Spanish, Spanish - 320 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info