602964
29
Zoom out
Zoom in
Previous page
1/36
Next page
Reference
29
VQT3B09
The images from this unit do not appear on
the television.
Picture is distorted.
¾
An incorrect resolution is selected in “HDMI Video
Format”. Reset the setting as follows:
1 While the unit is on, press and hold [OK], the yellow
button and the blue button on the remote control at the
same time for more than 5 seconds.
“00 rEt” is displayed on the unit’s display.
2 Repeatedly press [1] (right) on the remote control or
[Í/I] on the unit until “04 PrG” is displayed on the unit’s
display.
3 Press and hold [OK] on the remote control or [< OPEN/
CLOSE] on the unit for at least 4 seconds.
Set the item again. (> 26)
When Dolby Digital Plus, Dolby TrueHD, and DTS-HD
audio are not output in bitstream, select “Yes” in “Default
Settings” and make proper settings. (> 27)
¾
The unit and television are using different video
systems. Switch the setting as follows:
1 While the unit is on, press and hold [OK], the yellow
button and the blue button on the remote control at the
same time for more than 5 seconds.
“00 rEt” is displayed on the unit’s display.
2 Repeatedly press [1] (right) on the remote control or
[Í/I] on the unit until “05 P/n” is displayed on the unit’s
display.
3 Press and hold [OK] on the remote control or [< OPEN/
CLOSE] on the unit for at least 4 seconds.
The system switches from PAL to
NTSC
or vice versa.
¾
The system used on the disc doesn’t match your
television.
PAL discs cannot be correctly viewed on an NTSC
television.
This unit can convert NTSC signals to PAL60 for
viewing on a PAL television (“NTSC Contents Output”
in the “Picture”).
Video is not output in high-definition.
¾
Confirm that “HDMI Video Format” in the Setup menu
are set properly. (> 26)
A black band is displayed around the edge
of the screen.
The aspect ratio of the screen is abnormal.
¾
Confirm the “TV Aspect” is set properly. (> 26)
¾
Adjust the aspect setting on the television.
Cannot hear the desired audio type.
¾
Check the connections and the “Digital Audio Output”
settings.(> 9 , 25)
¾
To output audio from a device connected with an HDMI
cable, set “HDMI Audio Output” to “On” in the Setup
menu. (> 26)
Disc cannot be played.
¾
The disc is dirty. (> 4)
¾
Check the region code. (> 7)
Still pictures (JPEG) do not playback
normally.
¾
The images that were edited on the PC, such as
Progressive JPEG, etc., may not playback.
I can’t playback BD-Live.
¾
Confirm that this unit is connected to the broadband
Internet. (> 9)
¾
Confirm the “BD-Live Internet Access” settings. (> 24)
¾
Confirm a USB device is inserted into the USB port.
(> 13)
I can’t connect to the network.
¾
Confirm the network connection and settings.
(> 9, 11, 26)
¾
Check the operating instructions for each device and
connect accordingly.
Picture
Audio
Playback
Network
DMP-BD75EB-VQT3B09 .book 29 ページ 2011年1月17日 月曜日 午後7時37
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic DMPBD75EB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic DMPBD75EB in the language / languages: English as an attachment in your email.

The manual is 1,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info