602964
28
Zoom out
Zoom in
Previous page
1/36
Next page
28
VQT3B09
Reference
Troubleshooting guide
Before requesting service, please perform
the following checks.
If the problem remains unresolved, consult
your dealer for instructions.
The following do not indicate a problem with this unit:
Regular disc rotating sounds.
Image disturbance during search.
Unit doesn’t respond to remote
control or front panel buttons.
Disconnect the AC mains lead, wait 1 minute, then
reconnect the AC mains lead.
Cannot eject disc.
The unit may have a problem.
1 While the unit is on, press and hold [OK], the yellow
button and the blue button on the remote control at the
same time for more than 5 seconds.
00 rEt” is displayed on the unit’s display.
2 Repeatedly press [1] (right) on the remote control or
[Í/I] on the unit until “06 FtO” is displayed on the unit’s
display.
3 Press [OK] on the remote control or [< OPEN/CLOSE]
on the unit.
To return to the factory preset.
¾
Select “Yes” in “Default Settings” in the Setup menu.
(> 27)
To return all settings to the factory preset.
¾
Reset the unit as follows:
1 While the unit is on, press and hold [OK], the yellow
button and the blue button on the remote control at the
same time for more than 5 seconds.
00 rEt” is displayed on the unit’s display.
2 Repeatedly press [1] (right) on the remote control or
[Í/I] on the unit until “08 FIn” is displayed on the unit’s
display.
3 Press and hold [OK] on the remote control or [< OPEN/
CLOSE] on the unit for at least 4 seconds.
The remote control doesn’t work properly.
¾
Change the batteries in the remote control. (> 4)
¾
The remote control and main unit are using different
codes. If “SEt ” is displayed on the unit’s display when
a button is pressed on the remote control, change the
code on the remote control. (> 27)
The TV tuner mode is not displayed when
the TV is switched on.
¾
This phenomenon may occur, depending on the TV
setting, when “Quick Start” is set to “On”.
Depending on the TV, this phenomenon may be prevented
by reconnecting the HDMI cable to a different HDMI input
terminal or by changing the HDMI auto connection setting.
You have forgotten your ratings password.
You want to cancel the ratings level.
¾
The ratings level returns to the factory preset.
1 While the unit is on, press and hold [OK], the yellow
button and the blue button on the remote control at the
same time for more than 5 seconds.
“00 rEt” is displayed on the unit’s display.
2 Repeatedly press [1] (right) on the remote control or
[Í/I] on the unit until “03 VL” is displayed on the unit’s
display.
3 Press [OK] on the remote control or [< OPEN/CLOSE]
on the unit.
This unit does not recognize the USB
connection correctly.
¾
If inserted during playback the USB device may not be
recognized by this unit.
¾
Disconnect and reconnect the USB cable. If it still does
not recognize the connection, turn this unit off and on
again.
¾
USB devices connected using a USB hub may not be
recognized by this unit.
¾
If you connect USB HDD to this unit, use USB extension
cable that is supplied with the HDD.
Do you have the latest firmware installed?
Firmware updates may be released to correct operating
irregularities that are discovered with certain movies.
(> 12)
General operation
DMP-BD75EB-VQT3B09 .book 28 ページ 2011年1月17日 月曜日 午後7時37
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic DMPBD75EB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic DMPBD75EB in the language / languages: English as an attachment in your email.

The manual is 1,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info