602952
28
Zoom out
Zoom in
Previous page
1/32
Next page
RQT8966
28
Other difficulties with playback (continued) Page
Messages
The following messages or service numbers appear on the television or unit’s display when something unusual is detected during startup and
use.
On the television Page
On the unit’s display
§
The messages are alternately displayed.
No subtitles. Subtitles are not recorded on the disc.
Turn the subtitles on. Set “Subtitle” on the On-screen menu to “On”.
19
Angle cannot be changed. Angles can only be changed during scenes where different angles are recorded.
The resume play function does
not work.
Memorized positions are canceled when
–press [] several times.
–open the disc tray.
[DVD-A] [CD] [VCD] [MP3]: set to standby mode.
Cannot play. You inserted an incompatible disc. 4, 5
Cannot play on this unit. You tried to play a non-compatible image. 5
Cannot output Audio with HDMI
because of copyright
protection.
Should you connect equipment that does not support HDCP the audio from the CPPM
copy protected DVD-Audio cannot be output from HDMI AV OUT terminal. Connect the
audio cable of the Audio/Video cable (Red, White), optical digital audio cable
or coaxial
cable
to the corresponding terminals.
8–10
No Disc The disc may be upside down.
$ The operation is prohibited by the unit or disc.
F99 The unit fails to operate properly. Press [Í/I] on the main unit to switch the unit to standby.
Now press [Í/I] on the main unit again to turn the unit on.
HDMI ONLY
§
Some BD-Video discs can only be output with HDMI.
No PLAY When there is a viewing restriction on a BD-Video or DVD-Video. 21
No READ The disc is dirty or badly scratched. The unit cannot play.
PLEASE WAIT
§
Displayed when the unit is started and set to standby mode. This is not a malfunction.
The unit is carrying out its recovery process. You cannot operate the unit while “PLEASE
WAIT” is displayed.
U30
(“” stands for a number.)
The remote control and main unit are using different codes. Change the code on the
remote control.
Press and hold [ENTER] and the indicated number button at the
same time for more than 2 seconds.
11
UNFORMAT
§
You inserted an unformatted DVD-RAM, DVD-RW, +RW, an unused +R, +R DL or DVD-
RW (DVD-Video format).
UNSUPPORT
§
You have inserted a disc the unit cannot play. 4, 5
U59 The unit is hot.
The unit switches to standby for safety reasons. Wait for about 30 minutes until the
message disappears.
Select a position with good ventilation when installing the unit. Do not block the cooling fan
on the rear of the unit.
U72
U73
The HDMI connection acts unusually.
–The connected equipment is not HDMI compatible.
–Please use HDMI cables that have the HDMI logo (as shown on the cover).
–The HDMI cable is damaged.
H or F There is something unusual. (The service number displayed after H and F depends on the
unit’s condition.)
Check the unit using the troubleshooting guide. If the service number does not disappear,
do the following.
1. Disconnect the plug from the household mains socket, wait a few seconds, then
reconnect it.
2. Press [Í/I] to turn the power on. (The unit may be fixed.)
If the service number does not disappear despite doing the above, request service from
the dealer. Inform the dealer of the service number when requesting service.
25–28
D
R
Reference 11 Troubleshooting guide / Messages
DMP-BD10A.book Page 28 Thursday, March 15, 2007 7:45 PM
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic DMPBD10A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic DMPBD10A in the language / languages: English as an attachment in your email.

The manual is 6,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic DMPBD10A

Panasonic DMPBD10A User Manual - German - 96 pages

Panasonic DMPBD10A User Manual - Dutch, Danish - 108 pages

Panasonic DMPBD10A User Manual - French, Italian - 96 pages

Panasonic DMPBD10A User Manual - Swedish, Spanish - 108 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info