602952
24
Zoom out
Zoom in
Previous page
1/32
Next page
RQT8966
24
When connecting to an amplifier/receiver to enjoy multi-channel surround sound, use the following settings on this unit if they cannot be set on the
amplifier/receiver.
Speaker presence and size (A)
1 Press [3, 4, 2, 1] to select the speaker icon (A) and press
[ENTER].
2 Press [3, 4] to select the setting and press [ENTER].
Icon examples:
Surround speaker (LS)
Large: Select when the
speaker supports
low-frequency
(under 100 Hz) reproduction.
Small: Select when the speaker does not support low-frequency
reproduction.
When playing discs recorded with Dolby TrueHD or DTS-HD, 
even if you select “Small”, audio output will have an effect similar to
when “Large” is selected.
In order to make an ideal listening environment, settings of speaker
sizes may be automatically adjusted.
For example, if the subwoofer is set to “No”, the front speakers will
automatically be set to “Large”. (In this case, we recommend
connecting a speaker that can reproduce bass below 100 Hz.)
Delay time (B)
(Effective when playing multi-channel audio)
(Centre, surround and surround back speakers only)
For optimum listening with 7.1/5.1-channel sound, all the speakers,
except for the subwoofer, should be the same distance from the
seating position.
If you have to place the centre, surround and surround back
speakers closer to the seating position, adjust the delay time to
make up for the difference.
If either distance D or F is less than E, find the difference in the
relevant table and change to the recommended setting.
1 Press [3, 4, 2, 1] to select the delay time box (B) and press
[ENTER].
2 Press [3, 4] to select the setting and press [ENTER].
Channel balance (C)
(Effective when playing multi-channel audio)
This does not work when connected with HDMI terminals and “HDMI
Audio Output” (
23,
“HDMI”
tab)
is set to “On”.
1 Select “Test” and press [ENTER].
A test signal is output.
Front (L)_—)Centre_—)Front (R)_—)Surround (RS)
:;
Surround (LS)(— Surround Back(LB) (— Surround Back(RB)
2 While listening to the test signal, press [3, 4] to adjust the
volume of each speaker
Front speakers: 0.0 to s6.0 dB
Except for front speakers: 0.0 to s12.0 dB
3 Press [ENTER].
The test signal stops.
No signal is output for the subwoofer. To adjust its volume, play
something, then return to this screen to adjust to suit your taste.
To finish the speaker setting
Press [3, 4, 2, 1] to select “Complete” and press [ENTER].
Changing the speaker setting to suit your speakers
msec
msec
L
Complete
Test
LS
LS
R
RS
RS
dB
dB
dB
dB
dBdB
dBdB
msec
LB
LB
RB
RB
0.0
0.0
0.0
0.00.0
0.0
0.0
0.0
0.0
0.0
0.0
SW
SW
C




Subwoofer
Front (R)
Centre
Front (L)
Complete
(LS)
Surround
(RS)
Surround back
Test
signal
(RB)
(LB)
LS
LS
LS
LS
NoLarge Small
L
LS
R
SW
C
RS
C
RS
LS
L
LB
R
RS
SW
C
RB
C
RB
RSLS
LB
LS
Approximate room dimensions
Circle of constant primary listening distance
: Actual speaker position
: Ideal speaker position
: Primary listening
distance
5.1ch speaker connection
7.1ch speaker connection
D Centre speaker
Difference Setting
Approx. 34 cm
1.0 msec
Approx. 68 cm 2.0 msec
Approx. 102 cm
3.0 msec
Approx. 136 cm 4.0 msec
Approx. 170 cm 5.0 msec
F Surround/Surround back speakers
Difference Setting
Approx. 170 cm 5.0 msec
Approx. 340 cm 10.0 msec
Approx. 510 cm
15.0 msec
Settings 11 Changing the units settings
DMP-BD10A.book Page 24 Thursday, March 15, 2007 7:45 PM
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic DMPBD10A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic DMPBD10A in the language / languages: English as an attachment in your email.

The manual is 6,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic DMPBD10A

Panasonic DMPBD10A User Manual - German - 96 pages

Panasonic DMPBD10A User Manual - Dutch, Danish - 108 pages

Panasonic DMPBD10A User Manual - French, Italian - 96 pages

Panasonic DMPBD10A User Manual - Swedish, Spanish - 108 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info