602951
40
Zoom out
Zoom in
Previous page
1/48
Next page
40
VQT3W12
Troubleshooting guide
Before requesting service, please perform the
following checks.
If the problem remains unresolved, consult
your dealer for instructions.
The following do not indicate a problem with
this unit:
Regular disc rotating sounds.
Image disturbance during search.
Image disturbance when replacing 3D discs.
If still unable to turn the unit off, disconnect the
AC mains lead, wait 1 minute, then reconnect
the AC mains lead.
Cannot eject disc.
To return to the factory preset.
¾ Select “Yes” in “Default Settings” in the Setup
menu. (> 37)
To return all settings to the factory preset.
¾ Reset the unit as follows:
This unit is turned off when the input for the
TV is switched.
¾ This is a normal phenomenon when using
VIERA Link (HDAVI Control 4 or later). For
details please read the operating instructions
for the TV.
The remote control doesn’t work properly.
¾ Change the batteries in the remote control.
(> 5)
The TV tuner mode is not displayed when the
TV is switched on.
¾ This phenomenon may occur, depending on
the TV setting, when “Quick Start” is set to
“On”.
¾ Depending on the TV, this phenomenon may
be prevented by reconnecting the HDMI cable
to a different HDMI input terminal or by
changing the HDMI auto connection setting.
Do you have the latest firmware installed?
Firmware updates may be released to correct
operating irregularities that are discovered with
certain movies. (> 18)
Unit doesn’t respond to remote
control or the unit’s switches.
Touch and hold [Í/I] on the main unit for
3 seconds.
1 Turn the unit off.
2 Press and hold [KEYS], the yellow button and
the blue button at the same time for more
than 5 seconds.
Status LED and INFO LED start to flash.
3 Press the red button repeatedly until
ACCESS LED lights up.
4 Press the green button.
(> 9, “Indicator LEDs”)
General operation
1 Turn the unit off.
2 Press and hold [KEYS], the yellow button and
the blue button at the same time for more
than 5 seconds.
Status LED and INFO LED start to flash.
3 Press the red button repeatedly until the
CALL LED lights up and ACCESS LED
flashes.
4 Press and hold the green button for more
than 3 seconds.
¾ The remote control and main unit are using
different codes. If the Status LED and INFO
LED flash for six times when a button is
pressed on the remote control, reset the
codes on the unit and the remote control.
(> 38)
(> 9, “Indicator LEDs”)
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic DMPBBT01EG at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic DMPBBT01EG in the language / languages: English as an attachment in your email.

The manual is 1,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic DMPBBT01EG

Panasonic DMPBBT01EG User Manual - English - 156 pages

Panasonic DMPBBT01EG User Manual - German - 48 pages

Panasonic DMPBBT01EG User Manual - Dutch - 48 pages

Panasonic DMPBBT01EG User Manual - Dutch, Danish - 156 pages

Panasonic DMPBBT01EG User Manual - French - 48 pages

Panasonic DMPBBT01EG User Manual - French, Italian, Polish, Swedish, Spanish, Finnish - 156 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info