61596
121
Zoom out
Zoom in
Previous page
1/144
Next page
Others
121
VQT0Y44
[MEMORY CARD ERROR
PLEASE CHECK THE CARD]
• Failed access to the card.
Insert the card again.
[READ ERROR
PLEASE CHECK THE CARD]
Data reading error.
Insert the card again. Make sure the card is
inserted properly and then play back again.
[WRITE ERROR
PLEASE CHECK THE CARD]
Data writing error.
Turn the camera off and remove the card.
Then insert the card and turn the camera
on again. Be sure that the camera is turned
off before removing or inserting the card to
avoid damage. This error may also indicate
that the card is damaged.
[MOTION RECORDING WAS
CANCELLED DUE TO THE LIMITATION
OF THE WRITING SPEED OF THE
CARD]
When you set the [PICT.MODE] to [30fpsVGA],
[30fps16:9L] or [15fps16:9H], we recommend
using cards that offer 10 MB/second or higher
speeds (shown on their packages and
elsewhere) for best results.
• Depending on the type of Card, recording
may stop in the middle.
[A FOLDER CANNOT BE CREATED]
A folder cannot be created because there
are no remaining folder numbers that can
be used. (P108)
Save your data to your computer, then use
this unit to reformat the card. (P106)
If you execute [NO.RESET] in the [SETUP]
menu after formatting, the folder number is
reset to 100. (P24)
[MOTION MODE IS NOT AVAILABLE IN
3:2 ASPECT. SET THE ASPECT SWITCH
IN 4:3 OR 16:9.]
You cannot record a motion picture on a card
when the aspect ratio is set to [ ]. Set the
aspect ratio to either [
j
] or [
h
]. (P60)
[SELECT 4:3 TO STORE MOTION PIC.
TO INT. MEMORY.]
You cannot record a motion picture on the
built-in memory when the aspect ratio is set
to [
j] or [ ]. Set the aspect ratio to
[
h]. (P60)
[PICTURE IS DISPLAYED FOR 16:9 TV]/
[PICTURE IS DISPLAYED FOR 4:3 TV]
• The AV cable is connected to the camera.
Press [MENU/SET] if you want to delete
this message at once.
• Select [TV ASPECT] in the [SETUP]
menu to change the TV aspect. (P25)
This message also appears when the USB
connection cable is connected to the camera only.
In this case, connect the other end of the USB
connection cable to a PC or a printer. (P107, 110)
[PLEASE RE-CONNECT THE PRINTER.]
This message appears when you change
the mode dial to print mode [ ] with the
camera connected to a PC. Reconnect the
printer after changing the mode from [ ]
to another one and making sure that data
transmission is not in progress. ([ACCESS]
appears on the camera’s LCD monitor while
data transmission is in progress.)
[USB MODE CHANGED. PLEASE
REMOVE THE USB CABLE.]
This message appears when you set the
mode dial to a choice other than print mode
[ ] with the camera connected to the
printer. Set the mode dial back to [ ]
before disconnecting the USB cable.
Disconnect the cable after canceling printing.
121


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic DMC-LX2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic DMC-LX2 in the language / languages: English as an attachment in your email.

The manual is 6,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic DMC-LX2

Panasonic DMC-LX2 User Manual - German - 136 pages

Panasonic DMC-LX2 User Manual - Dutch - 136 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info