37
1
E
N
G
L
I
S
H
CQ-D5501N
36
Turn [VOLUME].
q : Up
w : Down
Turn [VOLUME].
q : Up
w : Down
Note:
¡ You cannot save
any SQ presetting
value in [1] button.
¡ Any SQ adjust-
ments will not
change the call up
screen names such
as ROCK and JAZZ.
Turn [VOLUME].
q : Up
w : Down
36
35
E
N
G
L
I
S
H
CQ-D5501N
Audio Settings
SQ Adjustment
You can adjust the characteristics of the currently selected
sound type (SQ).
It is also possible to preset up to 5 different adjusted SQs.
Tone/SQ adjustable range: –12 dB to +12 dB (by 2 dB)
SQ Low/Bass : ± 12 dB (at 60 Hz, 80 Hz, 100 Hz, 200 Hz)
SQ Mid : ± 12 dB (at 500 Hz, 1 kHz, 2 kHz, 3 kHz)
SQ High/Treble : ± 12 dB (at 10 kHz, 12 kHz, 15 kHz, 18 kHz)
¡ The bass/treble control frequency is fixed to the frequency
that has been selected for SQ.
FTo return an adjusted SQ to the default setting
q Press and hold [SQ] for more than 1 second, and select
the SQ which is to be returned to the default setting. (Only
for main unit)
w Press and hold [BAND] for more than 2 seconds.
Bass/Treble
You can adjust the bass and treble sounds.
Default: BAS (bass) 0 dB
TRE (treble) 0 dB
Setting range: –12 dB to +12 dB (by 2 dB)
Press [VOLUME] (PUSH SEL).
Press [VOLUME] (PUSH SEL).
Press [VOLUME] (PUSH SEL).
Volume
Default: 18
Setting range: 0 to 40
Press [VOLUME] (PUSH SEL)
to open the menu.
[DISP] (Return to the regular mode)
Press [VOLUME]
(PUSH SEL: select).
(Press [SEL] on the
remote control unit.)
Turn [VOLUME]. (Press [VOL
}] or
[VOL
{
] on the remote control unit.)
Note:
¡ To return to the regular mode, press [DISP].
¡ If no operation takes place for more than 5 seconds in audio setting (2 seconds in the volume adjustment, 10 sec-
onds in the SQ adjustment), the display returns to the regular mode.
¡ The volume can also be adjusted directly using [VOLUME] on the main unit. (a Page 10)
¡ Please refer to page 11 for calling up a preset SQ.
VOLUME BASS
SUBW LPF SUBW LEV
FADER
SQ SET
Regular mode TREBLE
BALANCE
[SQ] (Sound Quality)
q
Press
[
[
]
or
[
]
]
to select a frequency
band (Low, Mid, High).
[
[
]
: Higher frequency band
[
]
]
: Lower frequency band
Turn
[VOLUME]
to select a frequency.
q: Higher frequency
w: Lower frequency
w
Press
[
}
]
or
[
{
]
to adjust the level.
[}]: Up
[{]: Down
e Press and hold one of the preset buttons
from [2] to [6] for more than 2 seconds.
¡The adjusted SQ is preset in the num-
ber of the selected button, and return
to the regular mode resumes.
¡When you suspend the SQ preset adjustment, each level remains your recent
adjustment until a new SQ presetting operation is performed or you call up
the SQ preset.
[
[
]/[
]
]
[
{
] / [
}
]
[BAND]
Preset Buttons [2] to [6]
(Page 38)
Level
The selected frequency band
blinks.
Frequency
TA VOL
