69
68
E
N
G
L
I
S
H
CQ-D5501N
68
67
E
N
G
L
I
S
H
CQ-D5501N
Display
The disc is dirty or upside down.
The disc has scratches.
a Eject the magazine.
¡Check the disc.
¡Load the disc again.
To next disc automatically
No operation by some cause.
a Eject the magazine. If the failure persists, press the reset switch on
the CD changer. If normal operation is not restored, consult your
dealer or the nearest Panasonic Service Centre to ask for repairs.
No disc is in the CD Changer (magazine).
a Insert discs into the changer (magazine).
After 5 seconds
Troubleshooting
(continued)
Possible cause
a
Possible solution
The changer has become disconnected from the unit in the changer mode.
a Verify the wiring.
Note:
¡ Messages in the action and display sections of the error chart vary with changer. Refer to the operating instructions for
the CD changer for details.
■ CD Changer
Option
The disc is upside down.
The player for some reason cannot read the file you are trying to play.
(File recorded in an unsupported file system, compression scheme, data
format, file name extension, damaged data, etc.)
a Eject the disc. Select a file that the player can read. Check the type
of data recorded on the disc. Create a new disc if necessary.
Display
The disc is dirty.
The disc has scratches.
a Eject the disc.
Error Display Messages
■ CD/MP3
Possible cause
a
Possible solution
No operation by some cause.
a Eject the disc. If the disc is not ejected when you press [
u] (eject),
unplug the power cord and plug it again. In case the unit is still out
of order, consult your dealer.
■ DVD/VCD
The disc is still unfinalized.
aFinalize the disc.
Refer to “Discs that can be Played Back” (a Page 8) or “Notes on
Discs” (a Page 53) for other cases.
A DVD-R or DVD-RW is
not playable.
If audio or subtitles in that language are not recorded on the disc, the audio or
subtitles do not switch to that language. (Some discs permit switching
through a menu screen.)
aRefer to the guide provided with your disc.
The audio/subtitle lan-
guage selected in the
user settings is not
used.
It is not possible to switch if the disc does not have multiple audio lan-
guages/subtitle languages/angles recorded on it.
aRefer to the guide provided with your disc.
aSome discs permit switching through a menu screen.
aSometimes, switching angle is possible only with certain scenes.
Cannot switch the
audio language/subti-
tle language/angle.
aSet “D.Range Compression” to “Minimum”.
It is difficult to hear small
sounds. (Dolby digital
DVD software only)
Subtitle must be recorded on the disc, or they will not appear.
aRefer to the guide provided with your disc.
No subtitles appear.
aA certain amount of distortion is normal.
The picture becomes
distorted while fast for-
warding or reversing.
aVideo CD menu playback works only when playing a video CD that has
the playback control feature.
Video CD menu play-
back does not work.
The video signal setting of this unit (NTSC/PAL) does not match with the
video signal setting of the connected monitor.
aMake the same setting between this unit and the monitor.
The picture appears
incorrectly.
Cables are not correctly connected.
aConnect cables correctly.
aStop the car and apply the parking brake.
The picture does not
appear on the monitor.
Something such as a peeled label obstructs the disc coming out.
aPress and hold the [OPEN] for more than 2 seconds when the face plate
is open (disc forced ejection). In case that the disc forced ejection does
not work, consult your dealer.
The microcontroller in the unit operates abnormally due to noise or other fac-
tors.
aUnplug the power cord and plug it again. In case the unit is still out of
order, consult your dealer.
Disc unejectable
The unit is not sufficiently secured.
aSecure the unit to the console box.
The unit is tilted at over 30˚ in the front-to-end direction.
aMake the angle 30˚ or less.
Sound skipping due to
vibration
There is a flaw or foreign objects on the disc.
aRemove the foreign objects, or use a flawless disc.
Sound skipping or
noise
There is a flaw or foreign objects on the disc.
aRemove the foreign objects, or use a flawless disc.
The disc has unplayable formatted data.
aRefer to the description about available disc types.
No playback or disc
ejected
Problem
Possible cause
a
Possible solution
Note:
¡Refer to “Discs that can be Played Back”. (a Page 8)
