99987
106
Zoom out
Zoom in
Previous page
1/134
Next page
106
Chapter 7 Menu description tables
(continued)
The underlining in the variable range column indicates the setting in the preset
mode.
7-2-9 OPTION MODE
Item
Variable
range
Remarks
P.OFF GPS DATA HOLD
CLEAR
For selecting whether or not to hold the
UMID GPS position information while the
power is off and record the information as
the data still held as the previous value until
another measurement can be taken after the
power is next turned on.
HOLD: The data is held and recorded.
CLEAR: The data is cleared at the same
time as the power is turned off, and
all zeros (no information) are
recorded from the time the power is
turned on until the measurement is
next taken.
REC TALLY RED
GREEN
CHAR
For selecting the method to access records
on the unit when the unit is connected to
peripheral devices and used remotely.
RED: The red tally lamp lights.
GREEN: The green tally lamp lights.
CHAR: For displaying REC in the
viewfinder.
CUF
CUF
1394 SPEED S200
S400
For setting the transfer rate of signals output
from the DVCPRO connector.
S200: 200 Mbps
S400: 400 Mbps
CUF
1394 IN CH 0
:
63
AUTO
For setting the input channel of signals input
to the DVCPRO connector.
0 63: To fix to the designated value
AUTO: To follow the settings of the
externally connected devices
CUF
1394 OUT CH 0
:
63
AUTO
For setting the input channel of signals
output from the DVCPRO connector.
0 63: To fix to the designated value
AUTO: To follow the settings of the
externally connected devices
CUF
1394 CONTROL OFF
BOTH
For setting the control for recording
start/stop operations of external devices that
are connected to the DVCPRO connector.
OFF: Do not control the externally
connected devices.
BOTH: To control both the unit and the
externally connected devices
CUF
1394 CMD SEL REC_P
STOP
For setting the control of recording stop
operations of the external devices that are
connected to the DVCPRO connector.
REC_P: Operation to pause recording
STOP: Stopping operation
CUF
SDI METADATA ON
OFF
For setting metadata (UMID information) to
output to the HD SDI signals.
ON: To output
OFF: Not to output
CUF
SDI EDH ON
OFF
For setting that the detection signals of the
communication error is output to the HD SDI
signals.
ON: To output
OFF: Not to output
CUF
01.AJ-HDX900_P_E(VQT0X86)_E 06.6.22 12:53 PM ページ106
106


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic AJ-HDX900 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic AJ-HDX900 in the language / languages: English as an attachment in your email.

The manual is 2,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info