99987
105
Zoom out
Zoom in
Previous page
1/134
Next page
105
7
Chapter 7 Menu description tables
(continued)
The underlining in the variable range column indicates the setting in the preset
mode.
7-2-7 DOWNCON SETTING
H.DTL LEVEL 00
:
08
:
31
For setting the horizontal detail correction
level for the down converter output signals.
V.DTL LEVEL 00
:
04
:
31
For setting the vertical detail correction level
for the down converter output signals.
DTL CORING 00
01
:
15
For setting the noise elimination level of the
details.
H.DTL FREQ. 1
:
3
:
5
For selecting the horizontal detail
frequencies.
1: 2.5 MHz 4: 4 MHz
2: 3 MHz 5: 4.5 MHz
3: 3.5 MHz
CUFR
CUFR
CUFR
CUFR
2DLPF ON
OFF
For setting the 2-D low path filter reducing
cross colors.
ON: Cross colors are reduced.
OFF: Cross colors are not reduced.
CUFR
SET UP
For AJ-HDX900E
For AJ-HDX900P
0%
7.5%
For setting the setup level for the down
converter output signals.
<Note>
When the system frequency is set to 50 Hz,
the setup level will be 0%.
CUFR
CUFR
CUFR
Item
Variable
range
Remarks
DOWNCON MODE SQUEEZ
LT-BOX
S-CROP
For setting the mode of the down converter
output signals.
DETAIL ON
OFF
For setting the detail function for the down
converter output signals ON/OFF.
The down converter output signals contain
detailed components that are set during HD
signal processing. In this setting, these
signals overlap the detailed components
dedicated to the down converter outputs.
Even if this setting is turned off, it is
impossible to turn off the detailed
components set during HD signal
processing.
Item
Variable
range
Remarks
GENLOCK INT
EXT
For setting the standard signals for
executing the GENLOCK.
INT: For synchronizing to the standard
signal within the unit regardless of the
signals that are input in the GENLOCK
IN connector.
EXT: For synchronizing to the standard
signals that are input in the GENLOCK
IN connector.
H PHASE COARSE 100
:
+000
:
+100
For making coarse adjustment for aligning
phases of the horizontal synchronization, for
executing the GENLOCK.
GL PHASE HD SDI
COMPOSIT
For selecting the output signals that lock
phases to the signals that are input in the
GENLOCK IN connector.
HD SDI:
For locking the HD SDI signals to the
GENLOCK input.
For the down converter output signals,
the start position of the video delays by
about 90 lines.
COMPOSIT:
For locking the down converter output
signals to the GENLOCK input.
For the HD SDI output signals, the start
position of the video gains by about 90
lines.
H PHASE FINE 100
:
+000
:
+100
For making fine adjustment for aligning
phases of the horizontal synchronization, for
executing the GENLOCK.
7-2-8 GENLOCK
CUFR
CUFR
01.AJ-HDX900_P_E(VQT0X86)_E 06.6.22 12:53 PM ページ105
105


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic AJ-HDX900 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic AJ-HDX900 in the language / languages: English as an attachment in your email.

The manual is 2,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info