99987
39
Zoom out
Zoom in
Previous page
1/134
Next page
39
4
Chapter 4 Adjustments and settings for recording
(continued)
CAMERA
MODE
User bits
User bit memory function
The user bit settings (except for the actual time) are
automatically saved in the memory and retained even after
the power is turned off.
Tape continuity with the user bits
(Only when the recording format is 1080-50i or 1080-59.94i)
Selecting REGEN for the UB MODE item on the <TC/UB>
screen by performing menu operations will call up the user
bits recorded on the tape, making it possible to continue
recording from that value. However, it is not possible to
record the contents that were set.
Camera shooting information
In the unit, the frame rate information (camera shooting
mode) indicating the shooting rate and the active frame
information (update frame information) indicating the first
frame of which frame images are switched are automatically
stored as the cameras shooting information into the user bits
of LTC (when the recording format is 720-50P or 720-
59.94P) or the user bits of VITC (when the recording format
is 1080-59.94i and the video method is 24P or 24PA).
These kinds of information will be output from the TC OUT
connector rather than recorded on tape. It will also be
overlaid with the HD SDI signals output from the MON OUT
connector and VIDEO OUT connector.
The active frame information (update frame information) is
stored in the lowest digit of the user bits, while the frame rate
information (camera shooting mode) is stored in the lower
3rd and 4th digits. To store the camera shooting information
into the user bits of LTC and the user bits of VITC in other
shooting modes, open the <TC/UB> screen from the VTR
MENU page by performing menu operations and select
FRM RATE in the UB MODE item and the VITC UB MODE
item.
5
O To record the user bits of LTC, open the <TC/UB>
screen from the VTR MENU page by performing
menu operations and select USER in the UB MODE
item.
(When the recording format is 720-50P or 720-
59.94P, set the OUTPUT/AUTO KNEE switch to the
BARS position in order to record the user bits of
LTC in a mode for recording built-in color bar signals.)
O To record the user bits of VITC, select USER/EXT in
the VITC UB MODE item.
<Notes>
O The time code/user bits are also recorded in the VIDEO
AUX area of the units memory.
The time code (VITC) is the same value as the sub code
areas time code (LTC). The user bits (VITC user bits)
can be selected by menu operations using the VITC UB
MODE item on the <TC/UB> screen which is accessed
from the VTR MENU page, and it can be used for different
applications from the LTC.
O The number of digits that can record user bits may vary
with the recording format.
O When the recording format is 720-50P or 720-59.94P,
operations where FRM RATE or REGEN is selected in the
UB MODE item will be the same when USER is selected.
Furthermore, operations where TIME is selected in the
VITC UB MODE item will be the same when FRM RATE
or REGEN is selected.
O When only the upper 6 digits of the user bits can be
recorded, the remaining lower 2 digits are not recorded. In
this case, the user setting value and the lower 2 digits of
the time code generator that are selected in the UB
MODE item and VITC UB MODE item cannot be
recorded.
24P
24PA
LTC UB
All 8 digits can be recorded
(In accordance with the settings in the UB
MODE item)
VITC UB
Camera shooting information is recorded
automatically.
60i
50i
30P
25P
LTC UB
All 8 digits can be recorded
(In accordance with the settings in the UB
MODE item)
VITC UB
All 8 digits can be recorded
(In accordance with the settings in the
VITC UB MODE item)
When the recording format is 1080-50i or 1080-59.94i
OUTPUT/AUTO
KNEE switch
CAMERA MODE:
60P/50P/30P/25P/24P
BARS
(Built-in color
bar signals)
LTC UB
Upper 6 digits can be recorded.
(In accordance with the settings in the UB
MODE item)
VITC UB
Upper 6 digits can be recorded.
(In accordance with the settings in the
VITC UB MODE item)
CAM
(Camera video
image signals)
LTC UB
User bits information is recorded
automatically.
VITC UB
Upper 6 digits can be recorded.
(In accordance with the settings in the
VITC UB MODE item)
When the recording format is 720-50P or 720-59.94P
01.AJ-HDX900_P_E(VQT0X86)_E 06.6.22 12:52 PM ページ39
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic AJ-HDX900 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic AJ-HDX900 in the language / languages: English as an attachment in your email.

The manual is 2,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info