99987
38
Zoom out
Zoom in
Previous page
1/134
Next page
38
4-5 Setting the time data
When the user bits and time code are both to be used, the
user bits are set first.
If the time code is set first, the time code generator will stop
while the user bits are being set so that the time code setting
will be off.
The time code setting range extends from 00:00:00:00 to
23:59:59:29.
4-5-1 Setting the user bits
By setting the user bits, information, such as a memorandum
(date, time) of up to 8 digits in hexadecimal numbers, can be
recorded in the sub-code area (LTC) and the VIDEO AUX
area (VITC).
1
Set the DISPLAY switch to UB.
2
Set the TCG switch to SET.
4
Set the TCG switch to F-RUN or R-RUN.
3
Set the user bits using the SHIFT button, UP (+) button
and DOWN () button.
SHIFT button: This is used to cause the digit that is
to be set to flash. Each time it is
pressed, the flashing digit moves to
the right.
UP (+) button: This increments the numerical value
of the flashing digit by 1.
DOWN () button: This decrements the numerical value
of the flashing digit by 1.
4-4-3
CH3 and CH4 recording levels
Audio signals can be recorded separately for four audio
channels. Perform menu operations to open the <MIC/
AUDIO1> screen from the VTR MENU page to change the
settings for the AUTO LEVEL CH3 and AUTO LEVEL CH4.
Depending on the setting conditions and input level for these
items, recording levels for audio tracks CH3 and CH4
change as shown in the table below. Note that adjustments
cannot be performed manually.
AUTO LEVEL
CH3/CH4*
ON AGC ON AGC ON
Input level
LINE MIC
OFF AGC/LIMITER OFF LIMITER ON
<Note>
The DVCPRO HD EX format allows signals for 8 audio
channels to be recorded, but the same signals as CH1, CH2,
CH3 and CH4 will be recorded for CH5, CH6, CH7 and CH8,
respectively.
Chapter 4 Adjustments and settings for recording
(continued)
DISPLAY switch
Display window
TCG switch
DOWN () button
UP (+) button
SHIFT button
OUTPUT/AUTO KNEE switch
01.AJ-HDX900_P_E(VQT0X86)_E 06.6.22 12:52 PM ページ38
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic AJ-HDX900 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic AJ-HDX900 in the language / languages: English as an attachment in your email.

The manual is 2,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info