99989
121
Zoom out
Zoom in
Previous page
1/140
Next page
121
Setting menu screens VTR MAIN MENU (continued)
<Note>
When USER is set for the UB MODE item, it is not possible to set
EXT for the VITC UB MODE item.
Similarly, it is not possible to set EXT for the UB MODE item when
USER has been set for the VITC UB MODE item.
TC/UB screen
The time code and user bits settings are performed on
this screen.
Item
Variable
range
Remarks
TC MODE DF
NDF
VF
display
Item
Variable
range
Remarks
VF
display
USER
ENG
For setting the time code
to the DF or NDF mode.
DF
: The time code is set
to the drop frame
mode.
NDF
: The time code is set
to the non-drop
frame mode.
<Note>
This unit will perform the
processing in the non-drop
frame mode when the
frame rate has been set to
24 fps.
UB MODE USER
DATE
TIME
EXT
TCG
USER
ENG
For setting what is to be
written as the user bits in
the LTC area.
USER
: User setting (fixed).
DATE
: Real time value for
year/month/day/
hours.
TIME
: Real time value for
hours/minutes/
seconds.
EXT
: The UBG value is
slave-locked when
a TC signal is
supplied from an
external source.
(The user setting is
used when no
external input is
supplied.)
TCG
:
Time code
generator value
<Note>
Set the time on the
TIME/DATE menu screen
when using the UB MODE
item with real-time
operation.
TCG SET HOLD ON
OFF
USER
ENG
For selecting the operation
of TCG when the TCG
SET 5 power OFF 5
power ON 5 REC
operations are performed.
ON
: The TCG setting is
stored when the
power is turned off,
and is not
regenerated.
OFF
: The TCG setting is
not stored when the
power is turned off,
but is regenerated.
The underlining in the variable range column indicates the setting in
the preset mode.
FIRST REC TC REGEN
PRESET
USER
ENG
For setting the TC REGEN
mode when recording is
started.
REGEN
:
The time code set on the
tape is regenerated.
However, when the
frame rate has been set
to 24 fps, the time code
on the tape in those
parts where the drop
frame mode was
established will not be
regenerated.
PRESET
:
The time code set on the
tape is not regenerated.
However, it is forcibly
regenerated when the
unit is transferred from
the rec-pause mode to
the recording mode.
This unit automatically stores as the tape management information both the frame rate information which indicates the shooting speed and
the active frame information which indicates the first frame where the frame image was switched in the user bits of the sub-code track area
(this used to be the LTC area). This information is output from the TC OUT connector, HD SDI MON connector and HD SDI EE connector.
Further, the active frame information is stored in the least significant digit of the user bits while the frame rate information is stored in its
lower third and fourth digits.
<Notes>
OWhen “DATE,” “TCG” or “USER” has been selected as the UB MODE item setting on the TC/UB screen, the tape management
information is output from the least significant digit to the lower fourth digit of the user bits, so no other user bits information will be
output.
OThe tape management information is not output as the user bits information in the VIDEO AUX area (this used to be the VITC area).
CUF
CUF
CUF
CUF
03. 英(P89-127) MENU 05.5.18 10:44 ページ121
121


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic AJ-HDC27HP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic AJ-HDC27HP in the language / languages: English as an attachment in your email.

The manual is 3,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info