99989
120
Zoom out
Zoom in
Previous page
1/140
Next page
120
Setting menu screens VTR MAIN MENU (continued)
Item
Variable
range
Remarks
VF
display
MIC LOWCUT
CH2
FRONT
REAR
F&R
OFF
USER
ENG
For setting the high-pass
filter for the CH2 mic input.
FRONT
:The high-pass filter
for the front mic
input is set to ON.
REAR
: The high-pass filter
for the rear mic
input is set to ON.
F&R
: The high-pass
filters for both the
front and rear mic
inputs are set to
ON.
OFF
: The high-pass filter
for the CH2 input is
set to OFF.
LIMITER ON
OFF
USER
ENG
For switching the audio
limiter to ON or OFF.
ON
: The limiter operates.
OFF
: The limiter does not
operate.
TEST TONE NORMAL
ALWAYS
OFF
CHSEL
USER
ENG
NORMAL
:
The test tone signal is
output when the AUDIO
IN switch for CH1 is set
to front while BAR is
selected as the
CAM/BAR switch setting.
ALWAYS
:
The test tone signal is
always output when BAR
is selected as the
CAM/BAR switch setting.
OFF
:
The test tone signal is
not output.
CHSEL
:
The test tone signal is
output for the selected
channel when the
AUDIO IN switch CH1 or
CH2 is set to front while
BAR is selected as the
CAM/BAR switch setting.
CUE SELECT SIDE SW
CH1
CH2
MIX
USER
ENG
For setting the audio
signals to be recorded on
the cue track.
SIDE SW
:
The signals selected by
the CUE switch on the
side panel are recorded.
CH1
:
The CH1 signals are
recorded.
CH2
:
The CH2 signals are
recorded.
MIX
:
The CH1 and CH2
mixed signals are
recorded.
EMBEDDED
AUDIO (60 Hz)
ON
OFF
USER
ENG
For setting whether the
embedded audio signals
are to be output to the HD
SDI MON connector and
HD SDI EE connector
when 60.00 Hz has been
selected as the frame
frequency setting.
ON :
The embedded
audio signals are
output.
OFF :
The embedded
audio signals are not
output.
The underlining in the variable range column indicates the setting in
the preset mode.
<Note>
The frequency characteristics in the MIC LOWCUT ON mode are
200 Hz to 10 kHz.
MIC/AUDIO screen
Item
Variable
range
Remarks
VF
display
MIC LOWCUT
CH1
FRONT
REAR
F&R
OFF
USER
ENG
For setting the high-pass
filter for the CH1 mic input.
FRONT
:The high-pass filter
for the front mic
input is set to ON.
REAR
: The high-pass filter
for the rear mic
input is set to ON.
F&R
: The high-pass
filters for both the
front and rear mic
inputs are set to
ON.
OFF
: The high-pass filter
for the CH1 input is
set to OFF.
A/V SYNCHRO ON
OFF
USER
ENG
At low frame rates, the
images lag behind the
sound. This item is used
to select whether this lag
is to be adjusted.
ON:
The lag is adjusted so
that the timing of the
images is more or less
in synchronization with
the timing of the sound.
OFF:
The lag is not adjusted.
The same operations as
in previous models are
performed.
<Notes>
OWhen ON has been selected as the A/V SYNCHRO item setting,
noise may be carried on the audio signals at those moments
when the frame rate is switched.
OThe timing of the images and the timing of the sound are fixed
while recording is in progress. This means that these two timings
may not be in synchronization when the frame rate is switched
during recoding even when ON has been selected as the A/V
SYNCHRO item setting.
OAt frame rates of 12P and less, it is not possible for the timing of
the images and the timing of the sound to be in synchronization
even when ON has been selected as the A/V SYNCHRO item
setting. The 12P timing will be fixed.
CUF
CUF
CUF
CUF
CUF
CUF
CUF
03. 英(P89-127) MENU 05.5.18 10:44 ページ120
120


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic AJ-HDC27HP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic AJ-HDC27HP in the language / languages: English as an attachment in your email.

The manual is 3,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info