597942
39
Zoom out
Zoom in
Previous page
1/116
Next page
39
Viewfinder lamp displays
Setting item
Description of setting
GAIN 0 dB
Lamp display appears when the gain is
set to a value other than “0 dB.”
GAIN
–3 dB
Lamp display appears when the gain is
set to a value other than “–3 dB.”
SHUTTER
Lamp display appears when the
SHUTTER switch is at ON.
WHITE PRESET
Lamp display appears when “PRST”
applies to the channel in the white
balance memory.
EXTENDER
Lamp display appears when the lens
extender is used.
FILTER
Lamp display appears when the filter is
set to a value other than “3200 K.”
BLACK STR
Lamp display appears when the black
stretch is at ON.
D4300 K
Lamp display appears when the white
balance presetting is 4300 K.
Setting the lamp displays
Select the items targeted for the lamp display on
the “!LED” screen of the CAM MAIN MENU 2 screen.
(Under the factory settings, the “!LED” screen is not
displayed.)
To perform operations on the “!LED” screen, either
switch the unit to the engineer mode menu or select
the “!LED” screen on the CAM USER MENU SELECT
2 screen under the CAM MAIN MENU 4 screen.
<Note>
For details on selecting the engineer mode menu and
display screens, refer to “Menu operations” (pages 70
to 72).
1
Perform the menu operations (pages 70 to 72) to
open the “!LED” screen.
2
Turn the JOG dial button to move the arrow
(cursor) to the desired item.
4
Repeat steps
2
and
3
to set ON or OFF for the
other items.
3
For the selected item, press the JOG dial button,
and set whether or not the item is to be displayed
on the viewfinder screen.
Turn the JOG dial button, select display (ON) or no
display (OFF) and press the JOG dial button to
enter the selection.
5
Press the MENU button to exit the menu
operations.
The setting menu is cleared, and the display
showing the unit’s current statuses appears at the
top and bottom of the viewfinder screen.
n
< !LED >
GAIN(0dB) :ON
GAIN(3dB) :OFF
SHUTTER :ON
WHITE PRESET :OFF
EXTENDER :ON
FILTER :OFF
BLACK STR :OFF
D4300K :OFF
MATRIX :OFF
COLOR CORRECTION :OFF
MATRIX
Lamp display appears when the matrix is
at ON.
COLOR CORECTION
Lamp display appears when the color
correction is at ON.
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic AJ-HDC 27Ap at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic AJ-HDC 27Ap in the language / languages: English as an attachment in your email.

The manual is 3,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info