Connecting the extension control unit
Dedicated cable
ECU connector
By connecting the AJ-EC3 extension control unit
(optional accessory), some of the functions can be
operated by remote control.
When the AJ-EC3 is connected and the POWER
switches on the unit and AJ-EC3 are set to ON, the
unit is automatically set to the remote control mode.
<Notes>
O
Before connecting or disconnecting the dedicated
cable, be absolutely sure to set the POWER
switches on the unit and AJ-EC3 to OFF.
O
When “OFF” has been selected as the ECU DATA
SAVE setting on the CAMERA SW MODE screen
of CAM MENU, all the adjustments and settings
made using the AJ-EC3 will be cleared when the
unit’s power switch is set to OFF. Neither is it
possible to save these adjustments and settings on
a setup card.
However, the menu item settings can be saved on
a setup card.
When the AJ-EC3 is connected again, its settings
will be restored.
O
When “ON” has been selected as the ECU DATA
SAVE setting on the CAMERA SW MODE screen
of CAM MENU, all the adjustments and settings
made using the AJ-EC3 will not be cleared even
when the unit’s power switch is set to OFF.
Attaching the rain cover
Tighten the cord.
Close using the fastener.
Close using the fastener.
Example showing use of the SHAN-
RC700 rain cover