597941
121
Zoom out
Zoom in
Previous page
1/138
Next page
Reference
121
Shooting (when using a P2 card)
Cannot shoot even though
the P2 card is inserted
correctly.
The MEDIA switch may be in the TAPE position.
If so, set it to the P2 position.
P 25
Make sure the P2 card’s write-protect switch is not in the PROTECT
position.
Recording is not possible if it is in this position.
P 26
There may be little free memory left on the P2 card. If so, save the
data onto another media, and delete the data you no longer need;
alternatively, replace the card with a new one.
The P2 card may be formatted incorrectly. Alternatively, the card
you are using may not be formatted for use with the unit.
If so, format the card in the unit.
P 27
2 GB P2 cards cannot be used.
The media information display may be indicating “E”. If so, format
the card in the unit.
P 94
Cannot perform interval
recording, one-shot
recording or loop recording.
Make sure that the DIR ENTRY NG CARD warning is not displayed
after inserting the P2 card. Interval recording, one-shot recording
and loop recording cannot be performed with this card. Format the
card in the unit.
P 94
Shooting (when using a tape)
Cannot record even
though the tape is inserted
properly.
The MEDIA switch may be in the P2 position.
If this is the case, set it to the TAPE position.
P 29
Make sure the VCR lamp is off.
You cannot shoot in VCR mode. Press the mode switch to switch to
camera mode.
P 29
Make sure the tab on the cassette tape for preventing accidental
erasure is not set to SAVE. You cannot record when the tab is in this
position.
P 31
The cassette tape may have reached the end. If so, replace it with
another tape.
Make sure the cassette holder is closed.
You cannot operate the camera if the cassette holder is open.
If the AUTO OFF/T REEL LOCK warning appears, the tape may
have snapped. Check the tape.
Editing
Cannot perform audio
dubbing.
Make sure the tab on the cassette tape for preventing accidental
erasure is not set to SAVE.
You cannot edit when the tab is in this position.
P 31
You may be trying to edit a part that was shot in LP mode.
You cannot dub after recording in LP mode as the track on the tape
is thinner than the head.
Cannot read the data on the
SD memory card.
Make sure the SD memory card is formatted correctly.
If it is not, format the card in the unit.
P 32
In the tape mode, SD memory cards cannot be read. Switch to the
P2 mode in order to read these cards.
P 32
Cannot perform nonlinear
editing.
Check the specifications of your computer and connecting cable. P 83
Cannot dub onto an
external device.
Make sure the external device is connected correctly. P 79, 80
121


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic AG-HVX 200AP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic AG-HVX 200AP in the language / languages: English as an attachment in your email.

The manual is 16,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info