597937
149
Zoom out
Zoom in
Previous page
1/166
Next page
149
Chapter 9 Maintenance and Inspections
Inspection for Using an External
Microphone
1
Connect an external microphone to the REAR 1
and REAR 2 connectors.
2
Set the AUDIO IN switch to [REAR].
3
Set the LINE/MIC/+48V selector switches on
the rear panel to [MIC] or [+48V], depending
on the power supply type of the external
microphone.
MIC: For a microphone with internal power supply.
+48V: For a microphone with external power
supply.
4
Aim the microphone at the sound source and
check that the sound level indication in the LCD
or viewfinder varies with changes in sound
intensity.
The channels can also be checked separately by
connecting a single microphone to each channel.
Inspection of the clock, time code, and
user bits
1
Set the user bits as required.
Please refer to [Setting user bits] (page 58) for the
setting procedures.
2
Set the time code.
Please refer to [Setting the Time Code] (page 60) for
the setting procedures.
3
Set the TCG switch to R-RUN.
Press the COUNTER button to display the time
code on the LCD monitor or in the viewfinder.
4
Press the REC button.
Check that the counter display number changes
as recording progresses.
5
Press the REC button again.
Check that recording stops and the counter
display number stops changing.
6
Set the TCG switch to F-RUN.
Check that the counter display number changes
regardless of recording status.
7
Hold down the DISP/MODE CHK button to
check the date and time on the LCD monitor or
in the viewfinder.
Adjust the date and time setting if the DATE, TIME
and time zone is not correctly displayed.
For details, see [Setting Date and Time of Internal
Clock] (page 26).
NOTE
Note that date and time data set for DATE, TIME, and
time zone is recorded in clips, and affects the playback
sequence, etc. at the time of thumbnail manipulations.
149


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic AG-HPX 300P at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic AG-HPX 300P in the language / languages: English as an attachment in your email.

The manual is 12,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info