597937
147
Zoom out
Zoom in
Previous page
1/166
Next page
147
Chapter 9 Maintenance and Inspections
Chapter 9 Maintenance and Inspections
Inspections Before Shooting
Make sure you check that the system is operating normally
before embarking on a shoot. We recommend using a
colour video monitor to check the image.
Preparing for Inspections
1
Mount a charged battery.
2
Turn the POWER switch to ON to check the
battery remaining level in the viewfinder.
When battery capacity is low, replace it with a fully
charged battery.
1 9 9 9 min B 9 0 %
D I ON C 1 6 0 U S E R - 1
C A C
3
Insert a P2 card in the card slot and close the
slot cover.
Confirm that the P2 CARD ACCESS LED for the
inserted card slot lights up in orange. When P2
cards are installed in both card slots, the P2 CARD
ACCESS LED for the first inserted card (that was
first accessed) will light orange while the P2 CARD
ACCESS LED for a subsequently inserted card will
light green.
If the access LED for the P2 card slot in which a
P2 card is inserted keeps blinking in green, or if
there is no display, recording is not possible on
that particular P2 card.
1
2
Inspecting the Camera Unit
1
Set the zoom to electric zoom mode and check
the zoom operation.
Check that the image changes to telephoto and
wide angle.
2
Set the zoom to manual zoom mode and check
the zoom operation.
Turn the manual zoom lever to check that the
image changes to telephoto and wide angle.
3
Set the iris to automatic adjustment mode and
aim the lens at objects with different degrees
of brightness, to check that the automatic iris
adjustment operates normally.
4
Set the iris to manual adjustment mode and
turn the iris ring, to check the manual iris
adjustment.
5
Return the iris to automatic adjustment mode
and change the GAIN switch setting to L, M,
and H, to check the following items:
The iris is adjusted for objects with the same
brightness according to the switch setting.
The gain value displayed on the viewfinder screen
changes according to the switch setting.
6
When a lens with an extender is mounted, set
the extender to the operating position to check
that the extender operates properly.
147


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic AG-HPX 300P at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic AG-HPX 300P in the language / languages: English as an attachment in your email.

The manual is 12,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info