597937
144
Zoom out
Zoom in
Previous page
1/166
Next page
144
Chapter 8 Connecting to External Devices
A TYPE S and P2 STORE hard disk drive allows you to write
back data in card units.
Format the P2 card to prepare for write back.
1
Switch to the USB host mode.
For details, refer to [Switching to USB Host Mode]
(page 140).
2
Connect a hard disk drive via USB.
3
Insert the P2 card to which data will be written
back to.
4
Press the THUMBNAIL button, select HDD
EXPLORE from the thumbnail menu, move to
the partition with the data that will be written
and press the SET button.
5
Select OPERATION IMPORT ALL from
the thumbnail menu and select a slot with an
empty P2 card for writing to.
6
Select YES.
This starts the write process to the card.
COPY COMPLETED! announces the end of the write
back process.
NOTE
It is not possible to import data by the partition between P2
cards with different model numbers. Import data in clip units
from cards with a different model number.
To turn off the verify phase in a write back operation, select
HDD SETUP in the thumbnail menu and set VERIFY to OFF.
This speeds up the write back time but does not verify the
written data.
When a clip is written back to a P2 card it was not originally
on may make that clip an incomplete clip. Should this happen,
reconnect it.
Refer to [Reconnection of Incomplete Clips] (page 109).
Hard disk drive precautions
Use hard disk drives (including P2 STORE (AJ-
PCS060G)) according to the following conditions.
- Operate hard disk drives within their operating
specifications (temperature, etc.).
- Do not use hard disk drives in locations that are
unstable or exposed to vibration.
Some hard disk drives may not operate normally.
SATA (serial ATA) or PATA (parallel ATA) interface hard
disk drives connected using a USB conversion cable may
not be recognized.
Use hard disk drives with plenty of capacity for copying
data.
During formatting and copying, do not disconnect cables
or remove a P2 card that is involved in these activities
and do not power off this camera and the hard disk drive,
as the camera and hard disk drive will otherwise have to
be rebooted.
A hard disk drive is a precision instrument whose
read and write functions may fail in some operating
environments.
Please note that Panasonic accepts no liability
whatsoever for data loss or other losses either direct or
indirect arising from hard disk damage or other defects.
When data from this camera is copied to a hard disk and
is edited on another computer, the data may no longer
work in this unit and the hard disk data may become
corrupted.
Use of the drive mount converter distributed by the below
URL allows you to mount specific folders when a hard
disk drive is connected.
https://eww.pavc.panasonic.co.jp/pro-av/
144


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic AG-HPX 300P at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic AG-HPX 300P in the language / languages: English as an attachment in your email.

The manual is 12,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info