574347
65
Zoom out
Zoom in
Previous page
1/72
Next page
65
Troubleshooting (Q&A)
Power supply-related problems
Q1: No power.
A1: Has the battery or AC adapter been
connected correctly? Check the
connections. (See page 22)
Q2: The power goes off on its own.
A2: The power will automatically go off if
shooting is temporarily stopped for more
than 5 minutes in order to prevent the
battery from running down and keep the
tape from wearing.
Check the setting selected for the TAPE
PROTECT item on the setting menu
OTHER FUNCTIONS screen. (See page
50)
Q3: The power is turned on but it goes off
immediately.
A3-1: Has the battery run down?
If the remaining battery charge display
flashes or the display has
appeared, it means that the battery has
run down.
Recharge the battery or insert an
adequately charged battery. (See page
21)
A3-2: Has condensation formed?
When the camera recorder has been
carried into a warm room from a cold
place, condensation may form inside. If
this happens, the power is automatically
turned off, and ejecting the cassette is the
only operation which can be performed.
Wait until the condensation has dried up.
(See page 64)
Battery-related problems
Q1: The battery runs down quickly.
A1-1: Has the battery been adequately
charged? Charge it until the CHARGE
lamp of the AC adapter has gone off.
(See page 21)
A1-2: Is the camera recorder being used in cold
place?
The battery is easily affected by the
ambient temperature. Its operating time is
reduced in cold locations.
A1-3: Has the battery reached the end of its
service life?
The service life of the battery differs
depending on how it is used. If it works
only for a short time even after it has
adequately charged, it means that the
battery has reached the end of its service
life.
Q2: The battery cannot be charged.
A2: Is the DC cable connected to the AC
adapter? The battery cannot be charged
if this cable is connected.
Problems during normal video
recording
Q1: Recording is not possible even though
the cassette tape has been inserted
properly.
A1-1: Has the accidental erasure prevention
knob on the cassette tape been set to
SAVE? If it has, recording cannot be
performed. (See page 23)
A1-2: Has the cassette tape reached the end?
Replace it with a new one.
A1-3: Is the POWER switch at the ON position?
A1-4: Is the VCR lamp lighted?
Shooting is not possible in the VCR mode.
A1-5: Is the cassette holder open?
If the cassette holder is open, it is not
possible to perform any VCR operations.
A1-6: Has condensation formed?
If condensation has formed, ejecting the
cassette tape is the only operation which
can be performed. Wait until the
condensation dries up. (See page 64)
A1-7: If AUTO OFF/T REEL LOCK appears on
the display, the tape may have snapped.
Check the tape.
65


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic AG-DVX100A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic AG-DVX100A in the language / languages: English as an attachment in your email.

The manual is 1,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info