574347
63
Zoom out
Zoom in
Previous page
1/72
Next page
63
Playback
Normal playback
Set the POWER switch to ON, and press the
CAMERA/VCR button to switch to the VCR
mode.
Normal playback operations can be performed
using the OPERATION lever or accessory
wireless remote control unit.
Tape blank search
By pressing the EVF DTL/END SEARCH button
in the VCR mode, it is possible to search for
unrecorded parts on the tape or the part which
was shot last. For details, refer to the section
on the EVF DTL/END SEARCH button (page
11).
Index search
This function is used to search the index signals
recorded on the tape. An index search can be
performed using the accessory wireless remote
control unit.
ODuring tape playback, press the INDEX
button (9 or :) on the wireless remote
control unit.
S1 appears in the viewfinder and on the
LCD monitor, and the search for the next
scene is started.
OTo stop the search at any time, press the
STOP ($) button.
OEach time the INDEX button is pressed after
the search operation has commenced, S2
S3 are displayed, and the second or any
subsequent scene can be searched. When a
scene is located, playback commences from
that part of the tape. (Any scene up to the
ninth in the reverse or forward direction from
the present position of the tape can be
specified.)
The index search function may not operate
smoothly if any of the intervals between one
index and the next are less than one minute.
Variable speed search
This function changes the playback speed to
locate scenes.
OWhen the OPERATION lever is tilted in the 1
direction during tape playback, the variable
search mode is established, 1a appears in
the viewfinder and on the LCD monitor, and
the tape is played back at the 1a speed. No
sound is played back at this time.
OThe playback speed changes when the
AUDIO MON/VAR button is pressed. Each
time the button is pressed, the playback
speed changes by one setting in the following
sequence: 1/5a (or 1/3a in the LP mode),
1a, 2a, 5a, 10a and 20a.
OThe speed is varied in the forward direction
using the + button; conversely it is varied in
the reverse direction using the “–” button.
OWhen the remote control is used, pressing
the VAR.SEARCH button establishes the
variable speed search mode, and the
playback direction and playback speed are
changed using the V and B buttons
among the SET buttons.
OTo return to normal playback, tilt the
OPERATION lever in the 1 direction.
MENU
PUSH-SET
1
5
6
3
4
;
OPERATION lever
EVF DTL/END SEARCH button
Tape protection mode
When the camera recorder remains in the
playback pause or recording pause mode for
more than 5 minutes, it is automatically set to
the stop mode in order to protect the tape.
However, if it remains in the playback pause
mode when the temperature is low, the stop
mode may be established sooner.
63


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic AG-DVX100A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic AG-DVX100A in the language / languages: English as an attachment in your email.

The manual is 1,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info