597931
77
Zoom out
Zoom in
Previous page
1/82
Next page
TROUBLE-
SHOOTING
77
SPECIFI-
CATIONS,
OTHER
Condensation
How to find out whether there is condensation
inside and what to do about it if it has formed
If the condensation mark blinks after the camera-
recorder’s power has been turned on, it means that
condensation has formed inside the camera-recorder.
If this has happened, the power is automatically turned
off within a matter of seconds.
Take the following action.
Remove the cassette
No other functions will be operational. It may not
even be possible to remove the cassette tape
depending on the amount of condensation. If this is
the case, wait two to three hours before removing
the cassette.
Wait two to three hours with the cassette holder
open.
The time you need to wait will differ depending on
the amount of condensation and the ambient tem-
perature.
Turn on the power two to three hours later and
check whether or not the condensation display
has gone off.
To make doubly sure, wait another hour or so after
the condensation display has gone off before using
the camera-recorder again.
Also remember that even when the condensation
display has not appeared, condensation may be
forming.
Condensation builds up gradually so the condensa-
tion display may not appear for 10 to 15 minutes
after it has started to form inside.
In very cold areas, the condensation may freeze. If
this happens, it will take another two to three hours
for it to thaw out.
Tally lamp
System resetting
1
2
3
The tally lamp can be made to light up during shooting by selecting
“ON” as the REC LAMP item (P72) setting on the OTHER FUNC-
TIONS screen.
When the camera-recorder is in any of the following statuses, the
tally lamp blinks.
When the remaining charge of the battery is low
When there is not much tape left
When trouble has occurred in the tape transport system
When an operation initiated by the remote control unit has been
received
When the camera-recorder’s mode is being switched to shooting
Tally lamp
Reset the system microcomputer if you can no longer operate the
camera-recorder even though its power is on or a similar kind of a
problem has occurred.
Use a pointed object to press the RESET button on the camera-
recorder. This will reset the system microcomputer.
The menu settings entered and memory contents will not be cleared
even when the system is reset.
Do not press the RESET button when the camera-recorder is
operating normally.
CH1
CH2
AUDIO LEVEL
REC
MODE CHKSNS
OISZEBRA
RESETCOUNTER
ZOOM SPEED
OFF/M
H
L
AUDIO IN
FRONT
REAR
CH1 CH2
MIC
MIC
LINE
RESET
FOCUS USER 2
SEARCH
MANUAL
MENU
VOL/JOG
SEARCHD.ZOOM
USER 3
STILL
WHITE BAL
AUTO
PUSH
SHUTTER/IRIS
RESET button
77


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic AG-DVC 60p at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic AG-DVC 60p in the language / languages: English as an attachment in your email.

The manual is 2,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info