597925
49
Zoom out
Zoom in
Previous page
1/110
Next page
49
Shooting
Uploading metadata [META DATA]
You can perform the following operations.
If necessary make preparations.
Loading metadata
Insert the memory card on which the metadata
is recorded into the camera. (For details on clip
metadata, see page 48.)
Selecting whether to record the metadata on the
memory card
Initializing the metadata inside the camera
Displaying the metadata inside the camera
1
Turn the POWER/MODE switch to go into
<CAMERA> mode.
2
Press the <MENU> button.
Menu operation (Page 31 of Vol.1)
3
Tilt the OPERATION lever in the < >< >
directions to select [META DATA], and push the
OPERATION lever (or tilt in the <
> direction).
4
Tilt the OPERATION lever in the < >< >
directions to select items, and push the
OPERATION lever.
[CARD READ]:
Loads the metadata set on the memory card on
to the camera.
Move to [CARD READ], push the OPERATION
lever, select either [SLOT1]/[SLOT2]/[NO], and
push the OPERATION lever.
Up to eight items of metadata on the memory
card can be displayed, starting from the most
recent creation date.
If characters other than single-byte
alphanumeric characters are used in the
metadata le to be loaded they are displayed
as “*”.
[RECORD]:
Sets whether to record the metadata loaded on
the camera simultaneously on a memory card
when recording.
Select either [ON]/[OFF] (format/do not format),
and push the OPERATION lever.
The factory setting for this mode is [OFF].
[USER CLIP NAME]:
The [USER CLIP NAME] recording method is
selectable. For details, see the next column.
[META DATA PROP]:
Displays the metadata recorded in the camera.
[CLIP COUNTER RST]:
Resets the counter value to 1.
Select either [YES]/[NO] (reset/do not reset),
and push the OPERATION lever.
[META INIT SET]:
Initializes the metadata recorded in the camera.
Select either [YES]/[NO] (initialize/do not
initialize), and push the OPERATION lever.
5
Press the <MENU> button to release menu
mode.
Selecting the [USER CLIP NAME]
recording method
Press the <MENU> button and select [META
DATA]
[USER CLIP NAME] to select the [USER
CLIP NAME] recording method. Two options are
available: [TYPE1] and [TYPE2].
[USER CLIP NAME] to be recorded
[TYPE1] [TYPE2]
When clip metadata
has been loaded
Uploaded data
Uploaded data
+
COUNT
value*
When no clip
metadata has been
loaded, or when
recording of loaded
clip metadata has
been disabled
Sequential
5-digit number
in the order of
shooting
Sequential
5-digit number
in order of
shooting
49


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic AG-AC160AEJ at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic AG-AC160AEJ in the language / languages: English as an attachment in your email.

The manual is 12,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info