597925
27
Zoom out
Zoom in
Previous page
1/110
Next page
27
Shooting
Optical image stabilizer function
When shooting with the camera hand held, you can
reduce camera shake by using the optical image
stabilizer function.
The optical image stabilizer can be switched ON/
OFF with the <OIS> button. [
] is displayed
in the viewnder and the LCD monitor when the
optical image stabilizer is ON. When using a tripod,
natural images can be obtained by turning the
optical image stabilizer function OFF.
<OIS> button
When tracking a moving subject or there is a lot
of camera shake, stabilization may not work.
Adding effects to images
Effects can be added to images by pressing the
USER buttons assigned the [BLACKFADE] function
and the [WHITEFADE] function. The buttons are
forcibly disabled during playback, REC CHECK,
and thumbnail display.
[BLACKFADE]:
Press the button to fade out to black. At this
time audio fades out in the same way. Also,
continue to press the button and the image
fades out, release the button and it fades in.
[WHITEFADE]:
Press the button to fade out to white. At this
time audio fades out in the same way. Also,
continue to press the button and the image
fades out, release the button and it fades in.
Using USER buttons
You can assign a single function from among 16
types of functions to each USER button.
Use these buttons to change shooting conditions
quickly or add the fade effect to images to match
the subject.
In the factory settings, the following functions are
assigned to each of the buttons.
<USER1>: [BACKLIGHT]
<USER2>: [D.ZOOM]
<USER3>: [SHOT MARK]
For details, see the [USER1] - [USER3] items on
the setup menu [SW MODE] screen (Page 87).
If you press a USER button to which one of the
functions has been assigned, and then turn OFF
the power or change the mode during operation
of the USER button function, it will return to the
previous state.
Backlight compensation
When shooting subjects in backlight, press the
USER button to which the [BACKLIGHT] function
has been assigned.
[BACKLIGHT] will be displayed on the screen.
Auto iris control for backlight compensation will
prevent the image of the subject from becoming
dark.
Press the USER button again to release backlight
compensation. (In the manual iris mode, the iris
status is retained at the corresponding point even
when backlight compensation is canceled.)
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic AG-AC160AEJ at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic AG-AC160AEJ in the language / languages: English as an attachment in your email.

The manual is 12,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info