597925
25
Zoom out
Zoom in
Previous page
1/110
Next page
25
Shooting
Zebra patterns
When you press the <ZEBRA> button while in
<CAMERA> mode, a zebra pattern or marker is
displayed on the viewnder and LCD monitor, so
you can check brightness of the subject.
Portions where over exposure might cause white
out are displayed in a striped pattern.
Extremely bright area
Reecting area
When you adjust iris and shutter speed in manual
mode so that the zebra pattern disappears, you get
images with less white out.
Every time you press the <ZEBRA> button, the
display switches as follows.
[ZEBRA1]
[ZEBRA2]
[ZEBRA OFF]
[MARKER ON]
You can set the level of the zebra pattern with
the [ZEBRA DETECT1] item and the [ZEBRA
DETECT2] item on the setup menu [DISPLAY
SETUP] screen. (Page 93)
Also when you set the [ZEBRA DETECT2] item
to [OFF], even though you press the <ZEBRA>
button, [ZEBRA2] will not be displayed.
The set zebra pattern is displayed for a xed time
(approximately 2 seconds) as [%].
Marker
If the [Y GET MARKER] item on the setup menu
[DISPLAY SETUP] screen is set to [ON], press the
<ZEBRA> button and set [MARKER ON] (Page 25),
to display the marker in the center of the screen.
You can check brightness near screen center as a
number ([0%]-[99%]).
When brightness exceeds [99%], [99%
] is
displayed.
99%
Image level detection area
Image level
Marker
Press the <ZEBRA> button again to return to the
normal screen.
Checking and displaying shooting status
<DISP/MODE CHK> button
Hold down the <DISP/MODE CHK> button
during shooting standby or shooting to display all
information items including the setting status of
various shooting functions, and list of functions
assigned to the USER buttons, etc. Release the
button to return to the normal display.
Press the <DISP/MODE CHK> button during
shooting standby or shooting to hide all displays
other than operation status display, frame display
such as area, counter, marker, and safety zone
display. Press the button again to return to the
normal display. (Page 82)
This setting will be maintained even if the power
of the camera is turned off by turning the POWER/
MODE switch <OFF> or if the operation mode is
changed.
In addition, press the <DISP/MODE CHK> button
while the thumbnail screen is displayed in <PB>
mode to display the properties of the selected
clip. (Page 64) (Clips can be selected by moving the
cursor with the OPERATION lever.)
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic AG-AC160AEJ at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic AG-AC160AEJ in the language / languages: English as an attachment in your email.

The manual is 12,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info