62846
30
Zoom out
Zoom in
Previous page
1/41
Next page
28
CHANGING THE DIGITALAUDIO
OUTPUT SETTINGS
This screen allows you to set your set-top box
to automatically send Dolby Digital audio (if it
is available for the current programme) to any
equipment you have connected to the OPTICAL
AUDIO OUT connector.
From the Setup menu (see page 24), highlight
‘Digital Audio Output’ then press OK. The Digital
Audio screen appears (see right).
Use the table below to help you choose the setting
you want. Then use the L R buttons to select the
setting. The factory setting (when your set-top box
is new or if you reset your set-top box as described
below), is shown with a star * against it.
Saving your changes
When you have made the changes you wish to
make, press OK.
If you do not want to save your changes, press the
EXIT button.
Item Settings Comments
Auto-handling *O
On
You should set this to ‘On’ only if you have connected suitable audio
equipment to the OPTICAL AUDIO OUT connector.
The setting ‘On means that, if Dolby Digital audio is being transmitted, this
will automatically be sent to the OPTICAL AUDIO OUT connector.
The setting ‘O means that your set-top box will automatically select the
rst-available audio stream for the programme.
RESETTING YOUR SETTOP BOX
You can reset your set-top box if necessary.
It will return to the state it was in when you plugged
it in for the rst time.
IMPORTANT: All the settings you have changed
and any Favourite channels you have created
will be lost when you carry out a full reset.
If you wish to carry out a full reset, press MENU to
display the Main menu.
Highlight ‘Setup menu’ then press OK to display the
Setup menu.
USING THE SETUP MENU
Highlight ‘Factory reset then press OK to display the
Factory reset screen.
To conrm the full reset, use the L R buttons to
highlight Yes then press OK.
Or, to cancel the reset, highlight No then press OK.
After the set-top box has reset itself, you will have to
choose the Language and Resolution settings again.
Then, your set-top box will carry out its Network
scan, using the satellite dish conguration you have
selected (see pages 10 - 13).
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pace DS 810 XE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pace DS 810 XE in the language / languages: English as an attachment in your email.

The manual is 2,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info