62846
28
Zoom out
Zoom in
Previous page
1/41
Next page
26
CHANGING THE TV SETTINGS
SD settings
This screen allows you to specify the type of
standard-denition (SD) TV you have connected
to your set-top box. Making the correct settings at
this screen will ensure you have the best picture
available.
From the Setup menu (see page 24), highlight TV
settings’ then press OK. Then highlight ‘SD settings
and press OK. The SD settings screen appears (see
right).
Use U D to highlight the item you want to change,
then use L R to select the setting.
Use the table below to help you choose the
settings you want. The factory settings (when your
set-top box is new or if you reset your set-top box
as described on page 28), are shown with a star *
against them.
Item Settings Comments
TV screen format *4:3
16:9
If you have a widescreen TV, set this to ‘16:9’. If you have a standard
TV, set it to ‘4:3’.
Scaling Auto
*LetterBox
Pan & Scan
Your choice of setting aects widescreen transmissions shown
on standard (4:3) TVs. With ‘LetterBox’ the whole of a widescreen
transmission displays, but the picture does not ll the screen. With
‘Pan & Scan, the screen is lled, but only part of the widescreen
transmission displays.
SCART video *CVBS
RGB
If you set YPbPr video “On (see page 27), SCART video is
automatically set to “CVBS”. If your TV is RGB-compatible, but not
connected by component video leads, you can select the setting
“RGB” to improve picture quality.
SCART AV control *On
O
If this is set ‘On, your TV should switch automatically to show
digital channels from your set-top box on the TV screen, whenever
your set-top box is on. You may prefer to use your TVs remote
control to select the appropriate AV channel on your TV (in which
case, set ‘O’).
USING THE SETUP MENU
To test changed conguration settings, before you
save them, press the red button. Your set-top box
will temporarily display the eect of any changes.
When you have made the changes you wish to
make, press OK. If you do not want to save your
changes, press the EXIT button.
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pace DS 810 XE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pace DS 810 XE in the language / languages: English as an attachment in your email.

The manual is 2,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info