779808
18
Zoom out
Zoom in
Previous page
1/32
Next page
NEVER use chemicals or caustic liquids that cause bodily injury and/or property damage. You MUST
always follow the manufacturer’s advice and guidance on how to use detergents
5.2.4.1. To apply detergent, follow these steps: Fit black soap nozzle, prepare detergent
solution as required by job, place small filter end of detergent siphoning tube into detergent
container. NOTE: Make sure the filter is fully submerged in detergent while applying detergent. This
washer will only draw soap with the black soap nozzle. The Red, Yellow, Green and White nozzles will
not draw soap.
5.2.4.2. Apply detergents to the surface using long even and overlapping strokes. In general
leave the detergent on the surface for five minutes or as advised by the detergent manufacturer. DO
NOT allow the detergent to dry on the surface.
5.4.4.3. Once you have completed the soap application process you MUST flush the
detergent siphoning system after each use by placing the filter into a bucket of clean water, then
run the pressure washer in low pressure for 1-2 minutes. Failure to do this will result in blocked
siphoning tubes and filter.
Page 18
First edition - April 2017
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for P1PE PGP200PWA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of P1PE PGP200PWA in the language / languages: English as an attachment in your email.

The manual is 9.45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info